Publications

Department of Aeronautical Engineering

2025

S.No.	Publications
1	Sivanantham, Gokulkumar, Vinod Ayyappan, Prabhu Loganathan, Sasi Kumar Mani, Gurupranes Sivaraj Vijaya, Vijay Raghunathan, Sanjay Mavinkere Rangappa, and Suchart Siengchin. "Sustainable hybrid composites from flax, vetiver, and Luffa cylindrica: Acoustic and structural performance." Polymer Composites (2025). https://doi.org/10.1002/pc.29900
2	Sasi Kumar, M., S. Hemalatha, S. Ponnavan, and V. Varunkumar. "Characterization of chemically treated luffa aegyptiaca fiber-reinforced epoxy composites with varying bio-filler." JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2025). 1894–1912. https://doi.org/10.1080/01694243.2025.2473615
3	Periasamy D, Manoharan B, Arockiasamy FS, et al. Exploring the mechanical and thermal characteristics of polypropylene composites with recycled polyester waste as sustainable reinforcement for enhanced protection in safety helmets head band. Progress in Rubber, Plastics and Recycling Technology. 2025;0(0). doi:10.1177/14777606241313076
4	S.L. Pradeep Kumar, J. Suguna Yuvasri, B. Priyadharsani, Shaik Athik Ahamad, T. Karthik. Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer. Journal of Polymer and Composites. 2025; 13(02):560-616. https://journals.stmjournals.com/jopc/article=2025/view=207104
5	S. L Pradeep Kumar, V. Karthik Raja, R. Vaishali, T. Gokulakrishnan, V. Ukesh. Recycling of Plastic Waste Using Mini Shredder. Journal of Polymer and Composites. 2025; 13(03):426-435. https://journals.stmjournals.com/jopc/article=2025/view=211291
6	Santhosh Kumar D, Akarsh J K Nair, Manikandan A, Sathish Kumar S, Thiyakarajan S. Numerical Investigation on Medium Velocity Impact Response of Hybrid Metal Matrix Composite Laminate. Journal of Polymer and Composites. 2025; 13(02):346-358. https://journals.stmjournals.com/jopc/article=2025/view=203616.
7	Rajkumar, D. R., A. R. Saravanan, Nikunj Rachchh, Ranitha Rajendran, S. Vijayakumar, Nagaraj Patil, Aditya Kashyap, A. Karthikeyan, and Hari Prasadarao Pydi. "Mechanical and environmental performance of laminated composite plates reinforced with natural and synthetic fibers: a comparative study of flexural, water absorption and swelling characteristics." Discover Sustainability 6, no. 1 (2025): 905. https://doi.org/10.1007/s43621-025-01550-w
8	Mani, Sasi Kumar, Kumaresan Mayakannan, Sindhu Selvaraj, Krishna Varun Balasubramanian, and Sinchana Shri Vinu. "Green technologies for modern manufacturing." In Green Manufacturing, pp. 38-57. CRC Press, 2025.
9	Kumar, M. Sasi, N. Venkatesh, M. Makesh Kumar, SL Pradeep Kumar, D. Santhosh Kumar, and B. Deeban. "Behavioral Study of Tribological Coating of Smart Functional Composites for High Wear Applications." Functional Composites: Role in Modern Engineering (2025): 169-187. https://doi.org/10.1002/9781394242030.ch7
10	Angelin, I., R. Naren Shankar, K. Sathish Kumar, K. Anusindhiya, K. Vijayaraja, and E. Rathakrishnan. "Characterization of Lip Thickness Effects in Subsonic Coaxial Jets with Varying Velocity Ratio." Journal of Applied Fluid Mechanics 18, no. 10 (2025): 2518-2534. https://doi.org/10.47176/jafm.18.10.3419
11	Kumar, M. Sasi, S. Sathish, M. Makeshkumar, and N. Venkatesh. "Surface coating influence on the fiber reinforcement for automobile composites." Sustainable Composites for Automotive Engineering (2026): 271-293. https://doi.org/10.1016/B978-0-443-23669-3.00014-2
12	Kumar, M. Sasi, S. Sathish, M. Makeshkumar, and N. Venkatesh. "The role of the matrix in automobile composites—studies on recent advancements." In Sustainable Composites for Automotive Engineering, pp. 93-108. Woodhead Publishing, 2026. https://doi.org/10.1016/B978-0-443-23669-3.00012-9
13	Mani, Makeshkumar, Sasi Kumar Mani, Felix Sahayaraj Arockiasamy, Gokulkumar Sivanantham, and Jenish Iyyadurai. "A review on the effect of fiber treatment and fillers on mechanical properties of kenaf fiber–reinforced composites." International Polymer Processing 40, no. 4 (2025): 373-390. https://doi.org/10.1515/ipp-2025-0006
14	Kumar, SL Pradeep, B. Deeban, D. Santhosh Kumar, P. Baranitharan, Malinee Sriariyanun, and Mahesh Gopal. "Unveiling the armor: experimental study on ballistic impact resistance of silica aerogel, sorbothane, and graphite sandwich composites." Discover Materials 5, no. 1 (2025): 224. https://doi.org/10.1007/s43939-025-00421-5
15	SL, Pradeep Kumar, and Maniraj Jaganathan. "Formulation and analysis of novel hybrid material for shock wave endurance with integrated image processing techniques." Indian Journal of Engineering and Materials Sciences (IJEMS) 32, no. 03 (2025): 379-393. https://doi.org/10.56042/ijems.v32i03.16101
16	Deeban, B., Kosireddi Komali, E. Illango, and A. Sarathi. "Mechanical, moisture absorption, and morphological analysis of epoxy composites reinforced with natural fibres." Iranian Polymer Journal (2025): 1-25. https://doi.org/10.1007/s13726-025-01580-1

2024

S.No.	Publications
1	Sivanantham, Gokulkumar, Thyla Pudukarai Ramaswamy, Sathish Selvaraj, Aravindh Murugan, Felix Sahayaraj Arockiasamy, Sasi Kumar Mani, and Md Elias Uddin. "Adapting a Phenomenological Model for Predicting Acoustical Behaviour of Camellia Sinensis/Ananas Comosus/E-Glass Fibre-Blended Epoxy Hybrid Composites." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): 14644207241237736. https://doi.org/10.1177/14644207241237736.
2	Mani, Sasi Kumar, Selvaraj Sathish, Mani Makeshkumar, and Sivanantham Gokulkumar. "Experimental Studies on Water Absorption and Mechanical Properties of Hibiscus Sabdariffa (Roselle) and Urena Lobata (Caesar Weed) Plant Fiber–Reinforced Hybrid Epoxy Composites: Effect of Weight Fraction of Nano-Graphene Fillers." International Polymer Processing 39, no. 1 (2024): 59-69. https://doi.org/10.1515/ipp-2023-4398.
3	Sahayaraj, Felix A., M. Sasi Kumar, S. Sathish, S. Gokulkumar, I. Jenish, and M. Makeshkumar. "Fire Retardant Potential of Natural Fiber Reinforced Polymer Composites: A Review." Polymer-Plastics Technology and Materials 63, no. 7 (2024): 771-797. https://doi.org/10.1080/25740881.2024.2303608.
4	Sivanantham, Gokulkumar, Gurupranes Sivaraj Vijaya, Aravindh Murugan, Sathish Selvaraj, Kannan Thangavelu, Sasi Kumar Mani, Sathiya Seelan Marappan, Sanjay Siva Elango Sunitha, and Vishnu Purushothaman Geetha. "Characterization and Physicochemical Properties of Lignocellulosic Fibers from Fishtail Palm (Caryota Mitis) Leaf Stalks." Composites and Advanced Materials 33 (2024): 26349833241256968. https://doi.org/10.1177/26349833241256968.
5	Mani, Sasi Kumar, Sathish Selvaraj, Makeshkumar Mani, and others. "Improvement of Physical, Chemical, Mechanical, and Morphological Properties of Luffa Cylindrica Fiber Reinforcement Composites Using Java Seed Filler." Biomass Conversion and Biorefinery (2024). https://doi.org/10.1007/s13399-024-05779-9.
6	Mani, Sasi Kumar, Sathish Selvaraj, Gokulkumar Sivanantham, Felix Sahayaraj Arockiasamy, Jenish Iyyadurai, and Makeshkumar Mani. "Advancements in Chemical Modifications Using NaOH to Explore the Chemical, Mechanical and Thermal Properties of Natural Fiber Polymer Composites (NFPC)." International Polymer Processing 0 (2024). https://doi.org/10.1515/ipp-2024-0002.
7	Ramesh, M., J. Maniraj, D. Santhosh Kumar, and S. L. Pradeep Kumar. "Zinc‐Bromine Hybrid Redox Flow Batteries." In Advanced Redox Flow Technology, 91-106. (2024). https://doi.org/10.1016/j.rser.2018.03.016.
8	Periasamy, D., Manoharan, B., Niranjana, K., Aravind, D., Krishnasamy, S., & Natarajan, V.Recycling of thermoset waste/high‐density polyethylene composites: Examining the thermal properties. Polymer Composites, 45(3), 2739-2748(2024). https://doi.org/10.1002/pc.27953.
9	Mani, Sasi Kumar, Sathish Selvaraj, Makeshkumar Mani, and others. "Improvement of Physical, Chemical, Mechanical, and Morphological Properties of Luffa Cylindrica Fiber Reinforcement Composites Using Java Seed Filler." Biomass Conversion and Biorefinery (2024). https://doi.org/10.1007/s13399-024-05779-9.
10	Selvi, S., Pradeep, J., Arigela, S. H., Rajesh, T., Elangovan, P., Reddy, R., and Rajaram, A. "Energy Storage Systems Using Renewable Energy for Systems with Grid Integration." International Journal of Renewable Energy Research (IJRER) 14, no. 1 (2024): 166-175. https://doi.org/10.20508/ijrer.v14i1.14276.g8872.
11	Sivasankar, G. A., Krishna Varun, B., Sinchana Shri, V., and Gopinath, A. "Comparative Studies and Design Optimization of Business Aircraft. (2024)" https://doi.org/10.33564.
12	Kumar, Sasi M., S. Sathish, M. Makeshkumar, S. Gokulkumar, L. Prabhu, S. Hemalatha, S. Ponnavan, and Nancy Chopra. "Effect of Various Manufacturing Techniques on Mechanical Properties of Biofiber‐Reinforced Composites." In Sustainable Machining and Green Manufacturing (2024): 33-63. https://doi.org/10.1002/9781394197866.ch3.
13	Aravind, D., Diwahar, P., Bharathi, M., Prakalathan, K., Prasanth, M. S., and Jayavel, S. "Surface Modification and Engineering of Nanoscale Absorbent and Their Composite." In Carbon Nanomaterials and their Composites as Adsorbents, edited by Tharini, J., and Thomas, S. Cham: Springer, (2024). https://doi.org/10.1007/978-3-031-48719-4_6.

2023

S.No.	Publications
1	Deeban, Booramurthy, Jaganathan Maniraj, and Manickam Ramesh. "Experimental Investigation of Properties and Aging Behavior of Pineapple and Sisal Leaf Hybrid Fiber-Reinforced Polymer Composites." e-Polymers 23, no. 1 (2023): 20228104.
2	Makeshkumar, M., J. Anburaj, M. Sasi Kumar, and A. Johnson Santhosh. "Effect of Zirconium and Niobium on the Microstructure and Mechanical Properties of High-Strength Low-Alloy Cast Steels." Materials Research Express 10, no. 5 (2023): 056506. DOI: 10.1088/2053-1591/acd23b.
3	Periyasamy, D., Manoharan, B., Arockiasamy, F. S., Aravind, D., Senthilkumar, K., Rajini, N., and Al-Lohedan, H. A. "Exploring the Recycling Potential of HDPE Films Reinforced with Flax Fiber for Making Sustainable Decorative Tiles." Journal of Materials Research and Technology 25 (2023): 2049-2060. https://doi.org/10.1016/j.jmrt.2023.06.067.
4	Periasamy, D., Karuppiah, P., Manoharan, B., Arockiasamy, F. S., Kannan, S., Mohanavel, V., and Sivakumar, S. "Assessing the Recycling Potential of Thermosetting Polymer Waste in High-Density Polyethylene Composites for Safety Helmet Applications." e-Polymers 24, no. 1 (2023): 20230080. https://doi.org/10.1515/epoly-2023-0080.
5	Sahayaraj, Felix A., Joy Prabu, H., Maniraj, J., and others. "Metal–Organic Frameworks (MOFs): The Next Generation of Materials for Catalysis, Gas Storage, and Separation." Journal of Inorganic and Organometallic Polymers 33 (2023): 1757–1781. https://doi.org/10.1007/s10904-023-02657-1.
6	Sathish, T., Saravanan, R., Muni, T. V., Sivasankar, G. A., Kumar, J. P., Rajasimman, M., and Park, Y. K. "Effects of CuO/Al₂O₃/Water-WO₃ Nanomaterials on Net Zero Energy/Emission-Based Hydrogen Generation." Fuel 343 (2023): 127938. https://doi.org/10.1016/j.fuel.2023.127938.
7	Alghamdi, W., Mayakannan, S., Sivasankar, G. A., Singh, J., Naik, B. R., and Reddy, C. V. K. "Turbulence Modeling Through Deep Learning: An In-Depth Study of Wasserstein GANs." ICOSEC, 793-797. IEEE, (2023). https://doi.org/10.1109/ICOSEC58147.2023.10275878.
8	Sathish, T., Sivakumar, D. B., Sivasankar, G. A., Thilagham, K. T., Kaliappan, S., Saravanan, R., and Gupta, M. "Building Heating by Solar Parabolic Through Collector with Metallic Finned PCM for Net Zero Energy/Emission Buildings." Case Studies in Thermal Engineering 53 (2023): 103862. https://doi.org/10.1016/j.csite.2023.103862.
9	Sivasankar, G. A., Moorthy, C. B., Kaliappan, S., Sathyamurthy, R., Sathish, T., Saravanan, R., and Ağbulut, Ü. "Sustainable Nano-Added Biofuel Production from Borassus Flabellifer Oil for Conventional Internal Combustion Engines." Energy 282 (2023): 128381. https://doi.org/10.1016/j.energy.2023.128381.
10	Sivasankar, G. A., Karthick, P. A., Boopathi, C., Brindha, S., Nirmalraj, R. J. T., and Benham, A. "Evaluation and Comparison on Mechanical Properties of Abaca and Hemp Fiber Reinforced Hybrid Epoxy Resin Composites." Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.04.400.
11	Sivasankar, G. A. "Study of Hybrid Fuel Injectors for Aircraft Engines." DOI: 10.58414/SCIENTIFICTEMPER.2023.14.3.62.
12	Sivasankar, V., Omine, K., Zhang, Z., Shi, S., Sano, H., and Chicas, S. D. "Plasterboard Waste (PBW)–A Potential Fluoride Leaching Source in Soil/Water Environments and Fluoride Immobilization Studies Using Soils." Environmental Research 218 (2023): 115005. https://doi.org/10.1016/j.envres.2022.115005.
13	Sivasankar, G. A., and Thirunavukkarasu, T. "A Pragmatic Study of Organizational Behaviour in Aerospace Companies." The Scientific Temper 14, no. 3 (2023): 993-996. DOI: 10.58414/SCIENTIFICTEMPER.2023.14.3.66.
14	Mariappan, Y., Sivasankar, G. A., Srinivasan, K., Inaniya, P. K., and Vishwakarma, S. "Innovative Machine Learning Method for the Creation of Power-Maximizing Solar Trackers." ICECONF, 1-7. IEEE, (2023). https://doi.org/10.1109/ICECONF57129.2023.10083806.

2022

S.No.	Publications
1	Sivasankar, V., and Babu, P. S. "Normalized Gaussian Distributive Wavelet Transformation Based Iterated Functional Fractal Compression for Satellite Image Quality Enhancement." Mathematical Statistician and Engineering Applications 71, no. 4 (2022): 3309-3330. https://doi.org/10.17762/msea.v71i4.892.
2	Rashmi, M. R., Kola, R., Kumar, M., Pratyush, K., Dule, P., and Sivasankar, G. A. "Investigation of Heat Transfer for Silver Oxide (Ag₂O) and Iron Oxide (Fe₃O₄) Using Nano Fluid Over a Stretch Sheet." Materials Today: Proceedings 69 (2022): 1118-1125. https://doi.org/10.1016.

2021

S.No.	Publications
1	Makeshkumar, M., S. R. Surender, S. Arunprakash, R. Madesh, M. Sasi Kumar, and K. Sudharsan. "Microstructural and Mechanical Properties Evaluation of Dissimilar Aluminum Alloy and Bronze Joints Using Friction Stir Welding." Materials Today: Proceedings 47 (2021): 5239-5244. https://doi.org/10.1016/j.matpr.2021.05.563.
2	Makeshkumar, M., S. R. Surender, R. Madesh, M. Sasi Kumar, and K. P. Shankar. "Investigation on Surface Modified Al7075 with Niobium by Friction Stir Processing." Materials Today: Proceedings 45 (2021): 8054-8058. https://doi.org/10.1016/j.matpr.2021.01.094.

Department of Agricultural Engineering

2025

1.K.Senthil Kumar, R. Vasanthi, Mahdi Sh. Jaafar, Arunkumar Munimathan, Manoj Kumar Shanmugam, Mamdooh Alwetaishi, Asif Afzal, Parvathy Rajendran, It Ee Lee, “Experimental and exergy evaluation of a PCM integrated active indirect solar dryer for Turkey berries with economic and environmental assessment”, Scientific Reports, 2025.https://doi.org/10.1038/s41598-025-02549-z

2.K. Senthil Kumar, R. Vasanthi, Mustafa Shakir, Arunkumar Munimathan, A. S. Manirathnam, Mohammad Mukhtar Alam, Parvathy Rajendran, It Ee Lee, “Experimental investigation to enhancing the energy efficiency of a solar-powered VISI cooler”,Scientific Reports, 2025.https://doi.org/10.1038/s41598-025-01620-z

3.Arunkumar Munimathan, Silambarasan Rajendran, R. Vasanthi, Vinayagam Mohanavel, P. Padmavathy, Manikandan Ayyar, Sathish Kannan, Manzoore Elahi M. Soudagar, S. Kaliappan,“Analysis of power quality of Jamun biodiesel operated CI engine using STATCOM”,Results in Engineering, 2025.https://doi.org/10.1016/j.rineng.2025.104689

4.M Ramesh, M Tamil Selvan, A Felix Sahayaraj, I Jenish, P Balakrishnan, Arivumani Ravanan “Investigation of mechanical and viscoelastic properties of Agave cantala fiber-reinforced green composites for structural applications” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering https://doi.org/10.5281/zenodo.15041527 2025-2026

5.Arunkumar Munimathan, K. Senthil Kumar, R. Vasanthi, Anwar Khan, Sameer Algburi, Yohanis Dabesa Jelila, Salah J. Mohammed, Ali Majdi, “Experimental analysis on two stage scroll compressor using R32 refrigerant with and without vapour injection in heat pump”, International Journal of Air-Conditioning and Refrigeration, 2026. https://doi.org/10.1007/s44189-025-00091-1

2024

1.Raja, M. V., Manonmani, K., & Sahayaraj, A. F. (2024). Investigation on electrical discharge machining parameters of aluminium7075/boron carbide/titanium diboride hybrid composites by grey relational analysis. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 94(3), 287-299. https://doi.org/10.1007/s40010-024-00879-7

2.Ravichandran, S., Duraiswamy, R., Arockiasamy, F. S., & Muthukali, V. R. (2024). Microstructural analysis of AA8079 alloy sheets formed by friction stir incremental forming. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089241293887. https://doi.org/10.1177/09544089241293887

3.Kumar, B. A., Raja, M. V., Prakhash, V. V., Vinosh, M., & Shastry, P. P. (2024). The Determination of the Stress Field Surrounding a Quasi-Constrained Inclusion in a Chromium-3.5 nickel Alloy (No. 2023-01-5184). SAE Technical Paper. https://doi.org/10.4271/2023-01-5184

4.Babu Chellam, B. A. K., Vimal Raja, M., Dhiyaneswaran, J., Selvaraj, M., & Sangeeth Kumar, M. (2024). Microstructure and Strength of Zinc-Molybdenum Steel Joints Brazed with Nickel-Chromium-Zinc Filler Metal. SAE Technical Paper, 01-5255. https://doi.org/10.4271/2024-01-5255

2023

S.No.	Publications
1	Anand, B., Rekha, R. S., Remitha, K. R., Maniyammai, V., Ramaswamy, K., and Gautam, S. "Dynamic Change Analysis of Water Spread Region and Its Impact Assessment Using Spectral Indices of Remotely Sensed Data." Environment, Development and Sustainability (2023). DOI: 10.1007/s10668-023-03353-3.
2	Anbarasi, J., Yaknesh, S., Sampathkumar, K., and Rajamurugu, N. "Performance Characteristics Optimization in Dissimilar Friction Stir Welding Using Grey Relational Analysis." Materials Today: Proceedings 55 (2022): 294–298. DOI: 10.1016/j.matpr.2021.07.302.
3	Emeemal, C., Anthoniselvi, S., Nithyasri, P., Karthik, M., and Raj, C. M. "Fabrication of Manually Operated Seed Drill for Arachis Hypogeae and Zea Mays." International Journal of Advances in Agricultural Science and Technology 9, no. 6 (2022): 31–37. DOI: 10.47856/ijaast.2022.v09i06.004.
4	Muthukali, V. R., Jaganathan, D., Kumaresan, S. K., Premkumar, S., Mourya, S. M. J. P., and Hakkim, Y. A. "Design and Development of E-Scooter for Daily Use." AIP Conference Proceedings (2022). DOI: 10.1063/5.0108199.
5	Pandi, D., Balasubramanian, A., and Durai, P. "Computation of Rainfall Infiltrates into Coastal Soil of Andhra Pradesh, India." In Springer eBooks, 407–419, 2022. DOI: 10.1007/978-3-031-04707-7_22.
6	Raja, M. V. "Mechanical and Tribological Characteristics of Aluminium Hybrid Composites Reinforced with Boron Carbide and Titanium Diboride." Ceramics-Silikáty (2022): 396–406. DOI: 10.13168/cs.2022.0035.

2022

S.No.	Publications
1	Yaknesh, S., Sampathkumar, K., and Sevvel, P. "Effect of Tool PIN Geometry and Process Parameters during FSW of Dissimilar Alloys of MG." Materials Research 25 (2022). https://doi.org/10.1590/1980-5373-mr-2021-0508.
2	Yaknesh, S., Sampathkumar, K., Sevvel, P., and Solomon, I. J. "Generation of Force and Torque during Joining of AZ91C Plates by FSW under Distinctive Tool Tilt Angle and Their Impact on Mechanical Strength and Microstructure." Journal of Adhesion Science and Technology 37, no. 6 (2022): 1071–1090.

2021

S.No.	Publications
1	Dhiyaneswaran, J., Raja, M. V., Kumar, B. A., and Kumaran, C. M. "Design and Fabrication of Railway Track Cleaning Bot." Materials Today: Proceedings 37 (2021): 2677–2680. https://doi.org/10.1016/j.matpr.2020.08.524.

2019

S.No.	Publications
1	Raja, V., and Rajesh, K. "Fabrication of Wireless Remote Controlled Electric Lawn Mower." International Journal of Innovative Technology and Exploring Engineering 8, no. 10 (2019): 2024–2027. https://doi.org/10.35940/ijitee.j9314.0881019.

Department of AI&DS

2024

S.No.	Publications
1	Dr.C. Deepa, Processing and Properties of juite fibres and their sustainable composite materials:A review Journal of materials chemistry A January 202412(22) DOI:10.1039/D3TA05481K
2	Dr. Ellzabeth Rani, “South Indian agricultural crop yield prediction using deep learning and transfer learning models” Springer Nature 05-May-25 https://doi.org/10.1007/s00704-025-05505-z

2023

S.No.	Publications
1	Ramesh, M., and Deepa, C. "Processing and Properties of Jute (Corchorus olitorius L.) Fibers and Their Sustainable Composite Materials: A Review." Journal of Materials Chemistry A, October 2023. https://doi.org/10.1039/D3TA05481K.
2	Saranya, K., and Deepa, C. "Prediction of Chronic Kidney Disease Using BIRCH Algorithm in Machine Learning." In Security and Risk Analysis for Intelligent Cloud Computing. 1st Edition, 2023. ISBN 9781003329947.

2022

1.Dr.C. Deepa, “Preparation, synthesis, properties and characterization of graphene-based 2D nano-materials for biosensors and bioelectronics”. Journal of Materials Research and Technology July–August 2022, Volume 19, Pages 2657-2694 https://doi.org/10.1016/j.jmrt.2022.06.023

2.Dr.C. Deepa, “Nanotechnology-Enabled Biosensors: A Review of Fundamentals, Design Principles, Materials, and Applications” Bio Sensors Volume 13(1), Pages 40. https://doi.org/10.3390/bios13010040

3.Dr.C. Deepa, “Influence of Vachellia nilotica Subsp. indica Tree Trunk Bark Nano-powder on Properties of Milkweed Plant Fiber Reinforced Epoxy Composites “Journal of Natural Fiber Volume 19, 2022 - Issue 16, Pages 13776-13789 https://doi.org/10.1080/15440478.2022.2106341

4.Dr.C. Deepa, “Synthesis and thermomechanical properties of bioplastics and biocomposites: a systematic review “ Journal of Materials Chemistry B. 13-03-2023 https://doi.org/10.1039/D2TB02221D

5.Dr.C. Deepa, “Development and Performance Evaluation of a New Energy-Efficient Double Cluster-Head Routing (EEDCR) Protocol for Wireless Sensor Networks” Wireless Communication and Mobile Computing 21-06-2022 Volume 2022,Article ID 5041153

Department of Biotechnology

2025

1.Chandy, S. A., Rithvika, V., Ranjithkumar, R., Thayumanavan, T., Harish, B., & Subashkumar, R. (2025). Targeting Bacterial Biofilms: a Nanotechnological perspective. International Journal of Advanced Science and Engineering, 12(1), 5067–5082. https://doi.org/10.29294/ijase.12.1.2025.5067-5082

2.Gopal Samy Balakrishnan, Gaddala, Saravanan, Rifaya, Manivannan, Mohanasundaram and Venkatesa Prabhu. “Optimzed degradation of brilliannt green dye in aqueous solution using dextran stabilized.” Next Materials. 2025; 9: 101233. https://doi.org/10.1016/j.nxmate.2025.101233.

3.Subashini R, Geetha K, Janasuruthi A, Palanisamy T, Jeevitha K, Vishnu R, Samykannu M. Eco-Friendly Approaches to Azo Dye Removal: The Role of Microbial Azo-Reductases. Appl Biochem Biotechnol. 2025;197(10):6358-6376. doi: 10.1007/s12010-025-05343-9.

4.Amuthan, N., Sivakumar, N., & Gopal Samy, B. (2025). Integrated Hybrid Energy Management to Reduce Standby Mode Power Consumption. In Artificial Intelligence for Energy Management (pp. 335–369). Wiley. https://doi.org/10.1002/9781394303021.ch17

5.Chitra Devi T, Harish R., Abinaya R, Dhanvandhini S, Sivakumar R. Sustainable plastics from renewable resources: A review on starch-based bioplastics. Advances in Environmental Technology, 2025. https://doi.org/10.22104/aet.2025.7748.2179.

6.Thayumanavan Tha, Indiraji J, Kavisree L, Preethi D, Kamali Manickavasagam Lekshmi. Nanoparticles Used in Treatment of Cardiovascular Disease – A Review. Maydica journal .2025,7(10):214-243. https://doi.org/2486.07/zenodo.130509.

7.Sobana, M, Gayathri Devi S, Ezhilarrasi Mv, Ragavan M, Madhunika S. A Brief Review on Plant Wodyetia bifurcata. Journal of Emerging Technologies and Innovative Research.2025,12(7):357-365. https://www.jetir.org/view?paper=JETIR2507452.

8.Tha. Thayumanavan, Indiraji J , Kavisree L , Preethi D . ML approaches for thyroid disease prediction. International Scientific Journal of Engineering and Management.2025,4(8):1-6. https://www.doi.org/10.55041/ISJEM04940.

9.Gayathri Devi, Ashok S, Salomi K, Shubha Sree S. A Review on Early Detection of Skin Cancer Using Predictive Modeling. International Journal for Multidisciplinary Research (IJFMR).2025,7(4):1-12. https://www.ijfmr.com/papers/2025/4/51681.pdf.

10.Chitra Devi T, Abhilash Joshua M, Arunkumar VL, Gnana Guru P P. AI-Based Stroke Prediction Using Machine Learning: A Comparative Model Evaluation with SHAP Explainability. International Journal for Multidisciplinary Research (IJFMR). 2025,7(4):1-8. https://www.ijfmr.com/papers/2025/4/51727.pdf.

11.Arun Prasad Arunachalam Sivagurulingam, Sukanthi Nachimuthu, Pothana Kandaswami Vediyappan, Lipika Vijayakumar. Diabetes Prediction using Random Forest Classifier: A Machine Learning Approach. IJRTI.2025,10(7):852-861. https://www.ijrti.org/papers/IJRTI2507092.pdf.

12.Veerasekar N, Seyed Mohamed Abusalikhan S,Hari Priya .M. Machine Learning-Based Fertilizer Recommendation System for Sustainable Crop Production.International Scientific Journal of Engineering and Management.2025,4(7):1-6. https://www.doi.org/10.55041/ISJEM04825.

13.Veerasekar N, Mohamed Asekh A, Patrina JR, Poorvanisha N.Machine Learning-Based Classification of Prostate Cancer Using Clinical Biomarkers.International Scientific Journal of Engineering and Management.2025,4(7):1-7. https://www.doi.org/10.55041/ISJEM04828.

14.Mohanapriya Jayapal, Nisha S, Dhivyadharshini K, Praveen S. Diabetes Prediction by K Nearest Neighbour Algorithm. International Journal of Computer Science Trends and Technology (IJCST).2025, 13 (4):1-4. https://www.ijcstjournal.org/Vol13Issue4No1.html.

15.Sobana M, Ezhillarasi M V, Madhunika S, Ragavan M. A Research on Machine Learning and Explainable AI for Cardiovascular Disease Prediction. International Journal For Multidisciplinary Research.2025,7(4):1-9. https://doi.org/10.36948/ijfmr.2025.v07i04.51714.

16.Chitra Devi Thangavelu, Ms. Abinaya R, Ms. Dhanvandhini S, Mr. Sivakumar R. Artificial Intelligence Approaches for COVID-19 Detection Using Boosting Algorithms. International Journal for Multidisciplinary Research (IJFMR).2025,7(4):1-9. https://doi.org/10.36948/ijfmr.2025.v07i04.51705.

17.Sri Priya E, Kaviya Priya K, Naresh Kannan S, Subashini R. Brain Tumor Detection Using Feature Based Classification And Deep Neural Network. International Journal For Multidisciplinary Research.2025,7(4):1-9. https://doi.org/10.36948/ijfmr.2025.v07i04.51811.

18.Reshath R, Sanjith P, Asma J , Kamali Manickavasagam Lekshmi. Predictive Modelling for Early Diagnosis of Oral Cancer Using Supervised Learning Algorithms: A Comparative Analysis. International Scientific Journal of Engineering and Management.4(7):1-11. https://www.doi.org/10.55041/ISJEM04814.

19.Kanagalakshmi S, Harish M, Swathi S, Gopal Samy B. Early Prediction of Diabetes Using Logistic Regression. International Journal for Multidisciplinary Research (IJFMR).2025,7(4):1-11. https://doi.org/10.36948/ijfmr.2025.v07i04.51646.

20.Tholkaappiya S B, Dhanya M, Dharshini R. Understanding Werner Syndrome: How A Single Gene Accelerates Aging. International Journal of Engineering Development And Research .2025,13(4):123-127. https://rjwave.org/IJEDR/papers/IJEDR2504266.pdf.

21.Naseema Banu J, Baalaji R, Sabarna L. A review on Thalassemia: Understanding the Disorder, Diagnosis, Complications. International Journal of Engineering Development and Research. 2025,13(4):57-60. https://rjwave.org/IJEDR/papers/IJEDR2504259.pdf.

22.Boomika S, Kavinkumar R, Prasanna R. Comprehensive Review on Thalassemia: Molecular Basis, Diagnosis, And Innovative Treatment Approaches. International Journal Of Engineering Development and Research. 2025,13(4):884-891. https://rjwave.org/IJEDR/papers/IJEDR2504238.pdf.

23.Sahana S, Anisha begam M, Vijayalakshmi S, Sriram P. Rett Syndrome: A Comprehensive Review of Genetics Mechanisms, Clinical progression, and Theoretical Advances. International Journal of Engineering Development and Research .2025,13(4):573-583. https://rjwave.org/ijedr/track.php?r_id=302358.

24.Anushya S, Gopinath S, Sujitha Shruthika S. Huntington’s Disease. International Journal of Engineering Development and Research .2025,13(4) :911-919 https://rjwave.org/ijedr/papers/IJEDR2504242.pdf.

25.Varsha Shree P S, Sahanaa P K, Dharshini S. Genetics and Evolving Concepts of Tourette Syndrome. International Journal of Engineering Development and Research. 2025,13(4) :892-900. https://rjwave.org/ijedr/papers/IJEDR2504239.pdf.

26.M Balaji, S Devadharshini, S Gayathri. The Impact of Mutant Huntingtin on Neuronal Function: A Detailed Review of Huntington’s Disease Pathophysiology. International Journal Of Engineering Development and Research. 2025,13(4):213-216. https://www.rjwave.org/ijedr/papers/IJEDR2504278.pdf.

27.Govarthini N, Harini S, Shreya R The Role of Early Intervention in Down Syndrome: A Review of Current Practices. International Journal of Engineering Development and Research .2025,13(4) :20-27. https://rjwave.org/ijedr/papers/IJEDR2504254.pdf.

28.Hajira Ibrahim Meeral R, Harshini R, Shriram Thirumeni M, Jaisri G. When One Gene Goes Wrong: Comparative Perspectives on Monogenic Mutation Disorders. International Journal of Engineering Development and Research. 2025,13(4):202-212. https://rjwave.org/ijedr/papers/IJEDR2504277.pdf.

29.Cindrella G, Akshaya A, Deepa A. Hemophilia: Genetics, Diagnosis, and Modern Treatments. International Journal of Engineering Development and Research. 2025,13(4):650-658. https://www.rjwave.org/ijedr/papers/IJEDR2504328.pdf.

30.Prerna Pramod, Viswa. P, Rajkumar. S. Phenylketonuria-A Systematic Review. International Journal of Engineering Development and Research .2025,13(4) :395-400. https://www.rjwave.org/ijedr/papers/IJEDR2504302.pdf.

31.Madhumitha K, Dharshini M, Sivadharshini S.S. A Review On “Fibrodysplasiaossificans Progressiva: Genetic Bone Disorder.“ International Journal of Engineering Development and Research. 2025,13(4) :140-144. https://rjwave.org/ijedr/papers/IJEDR2504268.pdf.

32.Raksha N, Varnikha Sri S, Sahana S. Sickle Cell Anemia. International Journal of Engineering Development and Research .2025,13(4) :155-158. https://doi.org/10.56975/ijedr.v13i4.302388.

33.Andriya Christophil W, Priscilla Merlin M, Nithin Jose J. The Genetics of Albinism. International Journal of Engineering Development and Research. 2025,13(4):175-197. https://rjwave.org/ijedr/papers/IJEDR2504275.pdf.

34.Sastikka K, Joyce Agnes S, Kiruthika S. Unmasking Hypertrophic Cardiomyopathy :A Review of Early Symptoms and Diagnostic Challenges. International Journal of Engineering Development and Research. 2025,13(4) :855-861 https://rjwave.org/ijedr/papers/IJEDR2504234.pdf.

35.Durka P, Naveen S, Rithika K. Sickle Cell Diseases. International Journal of Engineering Development and Research. 2025,13(4) :1-15. https://www.rjwave.org/ijedr/papers/IJEDR2504252.pdf.

36.Yazhini S, Rubavahni J, Kaviya J.J. A Simple Study on Fragile X Syndrome: Genetic Basis, Symptoms, Diagnosis, and Therapeutic Research. International Journal of Engineering Development and Research. 2025,13(4) :486-492. https://rjwave.org/ijedr/papers/IJEDR2504313.pdf.

37.Harish Karuupiah R. Comprehensive Analysis of Fludrocortisone: Mechanisms, Therapeutic Efficacy, Adverse Effects, and Toxicological Considerations in Human Physiology. Technix International Journal for Engineering Research. 2025, 12(1):537-532. https://tijer.org/tijer/papers/TIJER2501070.pdf

2024

S.No.

Publications

Palanisamy, Senthilkumar, Nandhana Varnan, Shanmugam Venkatachalam, Kumarakuru Kuppuswamy, Gayathri Devi Selvaraju, Devanesan Sanjeevi Ranjith Santhosh Kumar, Rajendran Kamalabai Selvakesavan, Gokul Bangaru, and Devaraj Bharathi. "Preparation of Cellulose Fiber Loaded with CuO Nanoparticles for Enhanced Shelf Life and Quality of Tomato Fruit." Materials 17, no. 12 (2024): 2823. https://doi.org/10.3390/ma17122823.

2023

S.No.	Publications
1	Harish, B. S., Tha Thayumanavan, Veerasekar Nambukrishnan, and K. Sakthishobana. "Heterogeneous Biocatalytic System for Effective Decolorization of Textile Dye Effluent." 3 Biotech, 2023. https://doi.org/10.1007/s13205-023-03586-z.
2	Harish, B. S., Thangavelu Thayumanavan, Rathinasamy Subashkumar, K. Gopal, and N. Kowsik Raj. "Kinetics of Dye Decolorization Using Heterogeneous Catalytic System with Immobilized Achromobacter xylosoxidans DDB6." Preparative Biochemistry & Biotechnology, 2023. https://doi.org/10.1080/10826068.2023.2273487.
3	Ranjith Santhosh, D. S., S. Hari Puthiran, Gayathri Devi Selvaraju, Paul A. Matthew, P. Senthilkumar, Sowmya Kuppusamy, Ravishankar Ram Mani, et al. "Preparation and Characterization of Magnetite-Polyvinyl Alcohol Hybrid Nanoparticles (As-PVA-MNPs) Using Acanthophora spicifera Marine Algae Extract for Enhanced Antimicrobial Activity Against Pathogenic Microorganisms." Molecular Biotechnology, 2023. https://doi.org/10.1007/s12033-023-00903-y.

2022

S.No.	Publications
1	Kumar, D. S. Ranjith Santhosh, N. Elango, Gayathri Devi Selvaraju, Paul A. Matthew, Senthilkumar Palanisamy, Hayoung Cho, Fatimah S. Al Khattaf, Ashraf Atef Hatamleh, and Amit Dutta Roy. "Mycosynthesis of Zinc Oxide Nanoparticles Coated with Silver Using Ganoderma lucidum (Curtis) P. Karst and Its Evaluation of In Vitro Antidiabetic and Anticancer Potential." Journal of Nanomaterials, 2022. https://doi.org/10.1155/2022/2798532.
2	Preethi, U., and Tha Thayumanavan. "Cleavage Site of the Intein." Natural Volatiles and Essential Oils, (2022). https://doi.org/10.1016/j.jbiotec.2021.04.003.
3	Ramkumar, S., M. Thiruvengadam, T. Pooja, G. Sri Thatchayani, J. D. Alwin, B. S. Harish, S. Deva, et al. "Effects of Nanoparticles on Phytotoxicity, Cytotoxicity, and Genotoxicity in Agricultural Crops." In Elsevier eBooks, 2022. https://doi.org/10.1016/b978-0-323-91009-5.00022-7.

Department of Biomedical Engineering

2026

1.Ravindrakumar Selvaraj, J Justin Paul, D. S. Kishore Kumar, T Sebasheela, T Theivanai, “ Design and Optimization of a Multiaxial Knee Exoskeleton for Lower Limb Rehabilitation” , BioMed Bots Assurance, Taylor Francis, CRC Press, ed.1, 22 January 2026, https://doi.org/10.1201/9781003561309

2025

1.C. Arul Murugan a, P. Murugapandiyan b, C. Sivamani c, D. Haripriya,” Advancing the frontiers of N-polar GaN HEMT technology: materials, architectures, and applications in RF and power electronics” Materials Science in Semiconductor Processing Volume 199, 15 November 2025, 109874 https://doi.org/10.1016/j.mssp.2025.109874

2.R. Karthiga a, S. Ravi b, B.M.R. Manasa c, C. Sivamani d, N. Vinodhkuma,”Exploring progress in β-(AlxGa1-x)2O3/β-Ga2O3 heterojunction technology: A critical analysis of emerging power electronics and high-frequency applications in Micro and Nanostructures Volume 207, November 2025, 208289.

3.M. Sucharitha, Ravindrakumar Selvaraj, “IoT and Machine Learning-Based Controlled Drip Irrigation and Disease Detection in Perlette Grape Cultivation Using Sensor and Image Technology”, Digital Technologies and Tools for Smart Agriculture , CRC Press, ed.1, 29 May 2025. https://doi.org/10.1201/9781003487005

4.Palanisamy Vignesh Kumar, Basker Arumugam, Umapathi Krishnamoorthy” Efficacy of chitosan based activated carbon for mercury removal from wastewater through adsorption kinetic and thermodynamic studies for environmental sustainability” in International Journal of Chemical Reactor Engineering July 2025 DOI:10.1515/ijcre-2025-0088

5.V. Manikandan, U. Krishnamoorthy & P. Thangamani .” Influence of rGO/Cu-TiO2 Nanocomposite on Photo-Degradation Rose Bengal Dye Pollutant”in Strength of Materials 31 July 2025 Volume 57, pages 388–397, DOI:10.1007/s11223-025-00770-9

6.B. Keerthana, G. Preetha, K. Umapathi, V. R. Saminathan, T. Eevera, J. Malathi & S. Santhi ,” Acoustic detection of Callosobruchus maculatus (F.) (Coleoptera: Chrysomelidae) in green gram and cowpea using MEMS microphone system” Journal of Plant Diseases and Protection Volume 132, article number 157, (2025) DOI:10.1007/s41348-025-01152-8

7.K. Umapathi, M. Jayasheela, Manohar Ramya, J. K. Hari Sriram, G. Shibu, E. Gladson Paul, J. Yogitha, M. Sheik Abdullah, C. Sushma, M. Manjupriya & S. Jerone Samuvel “Exploring the synthesis and biomedical potential of banana stem fiber for antimicrobial and wound healing applications” in Discover Applied Sciences Volume 7, article number 613, (2025) DOI:10.1007/s42452-025-07151-6

8.V Geethalakshmi, R Jayaprakash, Umapathi Krishnamoorthy,” Synthesis, Characterization, Molecular Docking, and Biological Studies of Novel Quinoline – Schiff Base Ligand as Antibacterial and Anticancer Agents” in ChemistrySelect November 2025 10(42) DOI:10.1002/slct.202504136

9.Umapathi Krishnamoorthy” Non-invasive biochemical sensing with AI-driven analytics: a comprehensive review of technologies, applications, and future directions” in Analytical Methods Issue 48, 2025 DOI:10.1039/D5AY01580D.

10.Jayasheela Moses, Sukanya Balasubramani, Umapathi Krishnamoorthy “Novel approximate Booth multipliers (ABm-eRx) based on efficient encoding and reduction for error-tolerant applications” in Analog Integrated Circuits and Signal Processing Volume 123 , Issue 2 2025 https://doi.org/10.1007/s10470-025-02365-5.

11.D Sasikala, T Kowsalya, P Padmaloshani, Ravindrakumar Selvaraj, Classification of diabetic retinopathy based on Functional Linked Neural network utilizing segmented fundus image features, Biomedical Signal Processing and Control, Volume 95,2024, 106252, https://doi.org/10.1016/j.bspc.2024.106252.

12.Ravindrakumar Selvaraj, SK Pittala, S Sadulla, EC Duvvuri, “CT and MRI image reconstruction based single-path delay feedback (SDF) FFT pipeline architecture”, Hellenic Journal οf Radiology, Volume 9 , Issue 2, 2024

13.Ravindrakumar Selvaraj, Harini M, Bala Rathina kumari K, Sadhana, "Development of Control Unit for Ankle-Foot Orthosis," 2025 3rd International Conference on Intelligent Data Communication Technologies and Internet of Things (IDCIoT), Bengaluru, India, 2025, pp. 1046-1051, doi: 10.1109/IDCIOT64235.2025.10914718.

14.P. S. Venugopal, R. B. K. and Ravindrakumar Selvaraj, "Development of IoT Based Brain Computer Interface for Motor Function Detection Using EEG Signal Processing," 2024 International Conference on IoT Based Control Networks and Intelligent Systems (ICICNIS), Bengaluru, India, 2024, pp. 1763-1767, doi: 10.1109/ICICNIS64247.2024.10823357.

15.Gokila Viswanathan a, Ayyappan S b, Brindha Thirumalairaj c, Umapathi Krishnamoorthy “Tailoring photocatalytic performance: Lanthanum doping in nickel oxide for efficient degradation of some industrial cationic dyes in visible light radiation” in Desalination and Water Treatment Volume 320, October 2024, 100731. https://doi.org/10.1016/j.dwt.2024.100731

16.Umapathi Krishnamoorthy. Sukanya B,“ Intelligent Nanomaterial Image Characterizations–A Comprehensive Review on AI Techniques that Power the Present and Drive the Future of Nanoscience” in Advanced Theory and Simulations October 2024-7(12) DOI:10.1002/adts.202400479

17.Umapathi Krishnamoorthy, Priya Lakshmipathy, Manohar Ramya & Hady H. Fayek,in ”Navigating the future of healthcare with innovations and challenges in implantable battery technology for biomedical devices” in Discover Applied Sciences & SN Applied SciencesVolume 6. November 2024 .

18.Umapathi Krishnamoorthy , Shanmugam Jagan , Mohammed Zakariah , Abdulaziz S. Almazyad 4, K. Gurunathan” A Novel Optimized Deep Convolutional Neural Network for Efficient Seizure Stage Classification “in Computers, Materials & Continua Volume 81, Issue 3, 19 December 2024, Pages 3903-3926 https://doi.org/10.32604/cmc.2024.055910

19.Muthukannan M a, S. Saravanakumar b, M.T. Sambandam c, Umapathi K d, R. Kamalakannan in Guidelines for implementing cleaner production strategies in a natural rubber gloves manufacturing industry” Cleaner Engineering and Technology Vol 23, December 2024, https://doi.org/10.1016/j.clet.2024.100837.

20.Devi, K. Nirmala, Hariprasad, S., Natarajan, Ramkumar, Chinnaswamy, Sivamani, Ravi, S.” Investigating the Impact of Fe-Doped GaN and β-Ga2O3 Buffer Layers on a Laterally Scaled AlN/GaN HEMT Using Silicon Carbide Substrate for Next-Generation RF Electronics”in Journal of Electronic Materials Springer Volume 54, Issue 3, pp. 2355-2367,2025. 10.1007/s11664-024-11672-y

21.Sivamani Chinnaswamy, Gowtham Palanirajan, N. Vigneshwari, Jayasheela Moses, Ramkumar Natarajan,P. Murugapandiyan “ Influence of diverse dielectric materials on the performance of enhancement-mode AlGaN/GaN MISHEMTs with a β-Ga2O3 buffer and substrate for RF and power applications” in Journal of the Korean Physical Society 678 - 691 (2025) https://doi.org/10.1007/s40042-025-01318-5

22.P Sharmila, G Supraja, D Haripriya, C Sivamani, A Lakshmi Narayana “Silicon carbide MOSFETs: A critical review of applications, technological advancements, and future perspectives” in Micro and Nanostructures pp.no. 208126 https://doi.org/10.1016/j.micrna.2025.208126.

2024

S.No.	Publications
1	Viswanathan, Gokila, Ayyappan S, Brindha Thirumalairaj, and Umapathi Krishnamoorthy. “Tailoring Photocatalytic Performance: Lanthanum Doping in Nickel Oxide for Efficient Degradation of Some Industrial Cationic Dyes in Visible Light Radiation.” Desalination and Water Treatment 320 (August 23, 2024): 100731–31. https://doi.org/10.1016/j.dwt.2024.100731.
2	Krishnamoorthy, Umapathi, and Sukanya Balasubramani. “Intelligent Nanomaterial Image Characterizations – A Comprehensive Review on AI Techniques That Power the Present and Drive the Future of Nanoscience.” Advanced Theory and Simulations, October 30, 2024. https://doi.org/10.1002/adts.202400479.
3	Krishnamoorthy, Umapathi, Shanmugam Jagan, Mohammed Zakariah, Abdulaziz S. Almazyad, and K. Gurunathan. “A Novel Optimized Deep Convolutional Neural Network for Efficient Seizure Stage Classification.” Computers, Materials & Continua 81, no. 3 (2024): 3903–26. https://doi.org/10.32604/cmc.2024.055910.
4	Muthukannan, M., S. Saravanakumar, M. T. Sambandam, Umapathi K., and R. Kamalakannan. “Guidelines for Implementing Cleaner Production Strategies in a Natural Rubber Gloves Manufacturing Industry.” Cleaner Engineering and Technology 23 (December 2024): 100837. https://doi.org/10.1016/j.clet.2024.100837.
5	Devi, K. Nirmala, S. Hariprasad, Ramkumar Natarajan, Sivamani Chinnaswamy, and S. Ravi. “Investigating the Impact of Fe-Doped GaN and β-Ga₂O₃ Buffer Layers on a Laterally Scaled AlN/GaN HEMT Using Silicon Carbide Substrate for Next-Generation RF Electronics.” Journal of Electronic Materials, December 30, 2024. https://doi.org/10.1007/s11664-024-11672-y.

2023

S.No.	Publications
1	C. Thirumarai Selvi, M. Jayasheela, J. Amudha, et al., “An EEG-Based Thought Recognition Using Pseudo-Wigner–Kullback–Leibler Deep Neural Classification,” Circuits Syst Signal Process, vol. 42, pp. 1063–1082, 2023. DOI: 10.1007/s00034-022-02164-7.
2	K. Ramasamy, B. A. Sapna, M. Jayasheela, “A novel wearable monopole antenna with controlled SAR using metamaterial,” International Journal of Microwave and Wireless Technologies, vol. 15, no. 9, pp. 1524-1536, 2023. DOI: 10.1017/S1759078723000338.
3	E. Gomathi, M. Jayasheela, M. Thamarai, & M. Geetha, “Skin cancer detection using dual optimization based deep learning network,” Biomedical Signal Processing and Control, vol. 84, p. 104968, 2023. DOI: 10.1016/j.bspc.2023.104968.
4	S. Vairaprakash, J. Karuppaiah, B. Buvaneswari, & A. Alghamdi, “Removal of Salt and Pepper Noise Using Hybrid Adaptive Switching Median Filter with Ant Colony Optimization Technique in Nano Electronic Applications,” Journal of Nanoelectronics and Optoelectronics, vol. 18, no. 1, pp. 85–94, 2023. DOI: 10.1166/jno.2023.3365.
5	N. Sasirekha, J. Karuppaiah, H. Shekhar, & N. Naga Saranya, “Breast cancer detection using Histopathology Image with Mini-Batch Stochastic Gradient Descent and Convolutional Neural Network,” Journal of Intelligent & Fuzzy Systems, vol. 45, no. 3, pp. 4651–4667, 2023. DOI: 10.3233/jifs-231480.
6	C. Sivamani, P. Murugapandiyan, A. Mohanbabu, & A. Fletcher, “High performance enhancement mode GaN HEMTs using β-Ga2O3 buffer for power switching and high frequency applications: A simulation study,” Microelectronics Journal, vol. 140, p. 105946, 2023. DOI: 10.1016/j.mejo.2023.105946.
7	M. Ramya, R. Deepika, & K. Umapathi, “Investigations on fitness behaviour of non-porous and porous cardiovascular stent for percutaneous transluminal angioplasty,” Sadhana, vol. 48, no. 3, 2023. DOI: 10.1007/s12046-023-02162-8.
8	K. Umapathi, G. Shanmugam, S. Barua, & H. Hady Habib Fayek, “Investigation of active cell balancing performance for series connected lithium-ion cells in electric vehicle applications,” IET Power Electronics, vol. 16, no. 15, pp. 2492–2503, 2023. DOI: 10.1049/pel2.12575.
9	K. Umapathi, U. Pitchaikani, E. Rusu, & H. H. Fayek, “Performance Analysis of Harmonic-Reduced Modified PUC Multi-Level Inverter Based on an MPC Algorithm,” Inventions, vol. 8, no. 4, p. 90, 2023. DOI: 10.3390/inventions8040090.
10	S. Balasubramani, U. Jagadeeshan, & K. Umapathi Krishnamoorthy, “Performance optimized approximate multiplier architecture ST-AxM - based on statistical analysis and static compensation,” Microelectronics Reliability, vol. 151, p. 115277, 2023. DOI: 10.1016/j.microrel.2023.115277.

2022

S.No.	Publications
1	C. Sivamani, R. Manickam, V. Vincent, & S. Thankaraj, “Analysis of DC and RF performance of Al0.31Ga0.69N/Al0.1Ga0.9N/ β-Ga2O3 double quantum well HEMT on silicon carbide substrate,” Int J RF Microw Comput Aided Eng, vol. 32, no. 6, e23141, 2022. doi: 10.1002/mmce.23141.
2	S. Baskaran, M. Shunmugathammal, C. Sivamani, et al., “UWBG AlN/β-Ga2O3 HEMT on Silicon Carbide Substrate for Low Loss Portable Power Converters and RF Applications,” Silicon, vol. 14, pp. 11079–11087, 2022. doi: 10.1007/s12633-022-01846-w.

2021

S.No.	Publications
1	J. Revathi, A. Jude, R. Patan, et al., “Machine learning-based left ventricular hypertrophy detection using multi-lead ECG signal,” Neural Comput & Applic, vol. 33, pp. 4445–4455, 2021. doi.org/10.1007/s00521-020-05238-2

Department of Computer Science & Business System

2025

1.Mahalakshmi, K. Efficient healthcare data classification through gazelle-inspired optimization and multimodal deep learning. Knowl Inf Syst 67, 7263–7293 (2025). https://doi.org/10.1007/s10115-025-02424-3

2.K. Mahalakshmi, "Improved dingo optimisation-based feature selection with optimal deep learning enabled intrusion detection technique on cloud environment," in Electronic Government, an International Journal, Volume 21, Issue 5, pp 577-594, Sep 2025. https://doi.org/10.1504/EG.2025.148249

3.K. Mahalakshmi, "Enhancing anomaly detection in cloud computing through metaheuristics feature selection with ensemble learning approach," in China Communications, vol. 22, no. 8, pp. 168-182, Aug. 2025, doi: 10.23919/JCC.ja.2023-0683.

4.K. Krishneswari, “The digital ecologist:Transforming Environmental monitoring with Deep Convolutional neural networks”, In Utilitas Mathematica, Volume 122, Issue 2, pp 2129-2143 (2025).

5.Mathivanan. P "CardioMyocardium MRI Image Segmentation Using DeepLabv3 and ResNet for Early Detection" in Proceedings of 5th International Conference on Artificial Intelligence and Smart Energy. ICAIS 2025. Information Systems Engineering and Management, vol 41. Springer, Cham. https://doi.org/10.1007/978-3-031-90478-3_38

6.Mathivanan P, "Enhancing Assistive Technologies With Brain-Computer Interfaces (BCIS) and AI for Optimizing Neurorehabilitation Approaches to Recovery," in the Book titled "Neural Network Technologies and Brain-Computer Interfaces: Innovations and Applications", IGI Global Scientific Pubshing, ISBN13: 9798369394458, Pages 28, June 2025. DOI: 10.4018/979-8-3693-9445-8.ch015

7.Mathivanan, P "Integrating Deep Convolutional Neural Network with Blockchain for Secure and Transparent Data Management in Decentralized Healthcare Systems." in Artificial Intelligence and Blockchain in Precision Medicine and Virology. Medical Virology: From Pathogenesis to Disease Control. Springer, Singapore, Oct 2025. https://doi.org/10.1007/978-981-96-8919-4_11

8.Mathivanan P, "Deep Generative Models for Alzheimer's Disease Diagnosis," in the Book titled "Advances in Deep Generative Models for Healthcare and Medical Applications", Taylor and Francis, ISBN9781003602088, Dec 2025. https://doi.org/10.1201/9781003602088

9.Mathivanan P, "Optivize - Reliable and Automated University Timetabling using Hybrid AI," 10th IEEE International Conference on Smart Structures and Systems (ICSSS), Chennai, India, Jan 2026, pp. 1-6, doi: 10.1109/ICSSS66939.2025.11346320.

2024

S.No.	Publications
1	Mathivanan, P., D. MohanaPriya, P. Manjula, and Mariya Ouaissa. Protecting the Privacy of IoT-Based Health Records Using Blockchain Technology. In Technological Advancement in Internet of Medical Things and Blockchain for Personalized Healthcare. CRC Press: Taylor & Francis, 2024. https://doi.org/10.1201/9781003405450.
2	Mathivanan, P., K. Mahalakshmi, D. Mohanapriya, and Omer Melih Gul. AI-Based Biometric Systems in Financial Transactions: Case Study. In AI-Based Advancements in Biometrics and Its Applications. CRC Press: Taylor & Francis, 2024. https://doi.org/10.1201/9781032702377.

2023

S.No.	Publications
1	Dr. K. Mahalakshmi, C. Jansi Sophia Mary, “Deep Dive on Various Security Challenges, Threats and Attacks Over the Cloud Security,” IEEE Xplore, 17-18 March 2023. DOI: 10.1109/ICACCS57279.2023.10113125.
2	Dr. K. Mahalakshmi, C. Jansi Sophia Mary, “Modelling of intrusion detection using sea horse optimization with machine learning model on cloud environment,” International Journal of Information Technology, vol. 2024, no. 3, pp. 1981-1988, 2023. DOI: 10.1007/s41870-023-01722-9.
3	Dr. K. Mahalakshmi, M. Jayasheela, R. Athi Vaishnavi, P. Jegathesh, “A Survey on Impact of Internet of Medical Things Against Diabetic Foot Ulcer,” EAI Endorsed Transactions on Pervasive and Health Technology. DOI: 10.4108/eetpht.10.5170.
4	P. Mathivanan, R. Indhumathi, Dr. K. Mahalakshmi, “Digitization and Secure Process of Forensic Data Management Using Blockchain,” System, Computation, Automation and Networking (ICSCAN), IEEE Xplore (2024). DOI: 10.1109/ICSCAN58655.2023.10395662.
5	P. Mathivanan, D. Mohanapriya, “Digitization of Secure Blockchain Based Electronic Health Record System Using Smart Contract,” Journal of Data Acquisition and Processing, 07 April 2023, vol. 38, no. 2. Link.
6	Dr. K. Mahalakshmi, P. Mathivanan, D. Mohanapriya, S. Pavithra, “Internet of medical things: Biomedical data management and analytics for electronic health record,” Metszet Journal, ISSN: 2061-2710. DOI: 10.27896/METSZET8.11/23.

2022

S.No.	Publications
1	Dr. K. Mahalakshmi, Udayakumar Allimuthu, “Efficient mobile ad hoc route maintenance against social distance using attacker detection automation,” Mobile Network and Applications, ISSN: 1572-8153. DOI: 10.1007/s11036-022-02040-3.
2	Dr. K. Mahalakshmi, S. Jaya Prakesh, “Improved reversible data hiding scheme employing dual image-based least significant bit matching for secure image communication using style transfer,” The Visual Computer, ISSN: 1432-2315. DOI: 10.1007/s00371-021-02285-1.
3	Dr. K. Mahalakshmi, Udayakumar Allimuthu, “Intelligent route discovery towards rushing attacks in ad hoc wireless networks,” Journal of Ambient Intelligence and Humanized Computing, ISSN: 1868-5145. DOI: 10.1007/s12652-021-03195-9.

2021

S.No.	Publications
1	Dr. K. Mahalakshmi, K. Mahalakshmi, U. Allimuthu, L. Jayakumar, A. Dumka, “A Timeline Optimization Approach of Green Requirement Engineering Framework for Efficient Categorized Natural Language Documents in Non-Functional Requirements,” International Journal of Business Analytics, ISSN: 2334-4547. DOI: 10.4018/IJBAN.2021010102.

Department of Computer Science and Engineering

2025

S.No.	Publications
1	Bavyaa R, Raja Mohamed S,” Food waste reduction and provision: the current spectrum of solutions - a review”, Journal of Dynamics and Control, 2025. https://doi.org/10.71058/jodac.v9i1004.
2	V Surya, S Santhi,” Smart Agriculture: Advanced Rice Disease Detection Using YOLOv10 for Enhanced Crop Health Management”, IEEE Explorer, 2025. https://doi.org/10.1109/ICACRS62842.2024.10841505.
3	C Suresh, Selvabhuvaneswari S, “Enhancing Hydroponic Farming Using IoT Integration and Machine Learning Techniques”, IEEE Explorer, 2025. https://doi.org/10.1109/ICMSCI62561.2025.10894677
4	Rohini M, S Santhi, “Enhancing Crop Yield Prediction Through Hybrid CNN Models Using Multispectral Plant Leaf Data”, IEEE Explorer, 2025. https://doi.org/10.1109/ICSADL65848.2025.10933368
5	P Swetha, J Senthilkumar, “Development of a Naive Bayes-based Framework for Optimizing Crop Recommendation System and Enhancing Agricultural Yield Prediction”, IEEE Explorer, 2025. https://doi.org/10.1109/ICSADL65848.2025.10933086
6	S Deepan, M Revathy, “An Automated Methodology for Detecting Cercospora Infestations in Eggplant using YOLOv10N”, IEEE Explorer, 2025. https://doi.org/10.1109/ICSADL65848.2025.10933357
7	K Vishnuvarthan, R Renugadevi, S Santhi, “A CNN and HBA Based Approach for Grape Disease Identification”, IEEE Explorer, 2025. https://doi.org/10.1109/ICSADL65848.2025.10933347
8	S Santhi, M Murugan, Nandhiha V, Vivitha S, Karthikeyan D, “Cocoscan: AI-Powered Precision Diagnostics for Coconut Leaf Disease”, IEEE Explorer, 2025. https://doi.org/10.1109/ICSADL65848.2025.10933306
9	S Santhi, Thulasy Srinivasan, Adhithya G S, Madhumitha R, Saai Ganesh R S, Vasanth L M, “Smart Agriculture: An AI Based Solution for Early Corn Leaf Disease Detection Using Deep Learning”, IEEE Explorer, 2025. https://doi.org/10.1109/ICMLAS64557.2025.10967887
10	Badria Sulaiman Alfurhood, Wadi B Alonazi, K Arunkumar, S Santhi, Jamal Fadhil Tawfeq, Tariq Rasheed, Parthasarathy Poovendran, “Improving Holistic Business Intelligence with Artificial Intelligence for Demand Forecasting”, Journal of Multiple-Valued Logic & Soft Computing, 2025. MVLSC 42.1–3, pp. 241–260, Old City Publishing
11	J Senthil Kumar, R Pradeepa, Dr. Arulkarthick, S Chandragandhi, “Prediction of the pneumonia from the CT lung images by using the multiband google NET CNN”, Biomedical Signal Processing and Control, 2025. https://doi.org/10.1016/j.bspc.2025.107738
12	V Padmavathi, C Suresh, R Lakshmana Kumar, P Punitha, “Adaptive AI-Enhanced Signal Processing Framework for Optimized Communication in the Internet of Underwater Things (IOUT)”, International Journal of Pattern Recognition and Artificial Intelligence, 2025. https://doi.org/10.1142/S0218001425580029
13	Renugadevi R, Mohana Sundharam M, Dr. S. Santhi, Mohamed Badusha A, Vishnu R, Sutharsan E, “Mango Leaf Disease Detection using YOLOv5 – Mobile App”, IEEE Explorer, 2025. https://doi.org/10.1109/ICCMC65190.2025.11139904
14	R P Shermy, S Santhi, “PD-GLCST: integrating graph learning and sparse attention for accurate Parkinson’s disease diagnosis”, International Journal of Machine Learning and Cybernetics, 2025. https://doi.org/10.1007/s13042-025-02677-y
15	B Keerthana, G Preetha, K Umapathi, V R Saminathan, T Eevera, J Malathi, S Santhi, “Acoustic detection of Callosobruchus maculatus (F.) (Coleoptera: Chrysomelidae) in green gram and cowpea using MEMS microphone system”, Journal of Plant Diseases and Protection, 2025. https://link.springer.com/article/10.1007/s41348-025-01152-8
16	T G Ramabharathi, Kamalraj Subramaniam, K Srihari, C Suresh, “Predictive Modeling of Alzheimer’s Disease Progression Using TP-FBSE-EWT and Hybrid Optimization Techniques for Early Diagnosis and Monitoring”, Journal of Electrical Engineering & Technology, 2025. https://doi.org/10.1007/s42835-025-02507-9
17	Davinder Paul Singh, Tathagat Banerjee, Anand Deva Durai C, Senthil Kumar J, Chiranjit Dutta, Pranav Dass, Vijendra Singh Tanwar, Rajanish Kumar Kaushal, Ram Murat Singh, Yogendra Narayan, Debabrata Swain , “A Comprehensive Study of Various Hybrid Deep Learning Models for Automated and Explainable Pneumonia Detection in the Pulmonary Alveolar Region: Current Insights and Future Directions”, Archives of Computational Methods in Engineering, 2025. https://link.springer.com/article/10.1007/s11831-025-10453-y
18	Pradeepa Sampath, Gopika S, S Vimal, Yoonje Kang, Sanghyun Seo,“An explainable digital twin framework for skin cancer analysis using early activation meta-learner”, Frontiers in Computer Science, 2025. https://doi.org/10.3389/fcomp.2025.1646311
19	Pradeepa Sampath, N Sasikaladevi, Mukesh Prasanna, Saketh Pallempati, Vimal Shanmuganathan, Seifidine Kadry, “Explainable artificial intelligence based microscopic peripheral blood cell image classification by exploiting quadratic convex optimization”, Engineering Applications of Artificial Intelligence, 2025. https://doi.org/10.1016/j.engappai.2025.112040
20	L Kalaivani, R V Maheswari, S Vimal, M Rajesh, R Sitharthan, “Optimized Deep Neural Network for Defect Recognition in Switched Reluctance Motors With Unbalanced Partial Discharge Datasets”, IEEE, 2025. https://ieeexplore.ieee.org/document/11192186
21	S Pradeepa, K Ramya, S Vimal, P Subbulakshmi, Gaurav Dhiman, Tarik A Rashid, M Aladdin, “HyperGAN: A novel approach for the biomedical cancer text documents classification using Deep Hypergraph Attention Network”, Elsevier, 2025. https://doi.org/10.1016/j.smhl.2025.100598
22	Pradeepa Sampath, Biyyapu Sai Hari Krishna, Shanmuganathan Vimal, Shriram K Vasudevan, Ruben Gonzalez Crespo, “Enhancing AG News Classification With Hypergraph Attention Networks and Quadratic SVM”, Expert Systems (Wiley), 2025. https://doi.org/10.1111/exsy.70150
23	Asit Kumar Das, Janmenjoy Nayak, Bighnaraj Naik, Hima Bindu Maringanti, S Vimal, Danilo Pelusi, “Computational Intelligence in Pattern Recognition”, Springer Conference Proceedings, 2025. https://link.springer.com/book/10.1007/978-981-97-8093-8
24	Pradeepa Sampath, Sasikaladevi Natarajan, S Vimal, Sanghyun Seo, “LuNet: Development of Lung Cancer detection from CT Scan images using hybrid Customized deep Convolution Neural Networks”, KSII Transactions on Internet and Information Systems, 2025. http://doi.org/10.3837/tiis.2025.10.002
25	Pradeepa Sampath, Biyyapu Sai Hari Krishna, Shanmuganathan Vimal, Shriram K Vasudevan, Ruben Gonzalez Crespo, “Enhancing AG News Classification With Hypergraph Attention Networks and Quadratic SVM”, Expert Systems, 2025. https://doi.org/10.1111/exsy.70150
26	L Kalaivani, R V Maheswari, S Vimal, M Rajesh, R Sitharthan, “Optimized Deep Neural Network for Defect Recognition in Switched Reluctance Motors With Unbalanced Partial Discharge Datasets”, IEEE, 2025. https://doi.org/10.1109/MPEL.2025.3593772
27	Aarthi D, S P Santhoshkumar, M Ashok Kumar, K Vijayarajasekaran, Gajalakshmi S, Saurabh Chandra, “Deep Learning-Driven Real-Time Anomaly Detection for Proactive Cybersecurity in Critical Infrastructure”, IEEE, 2026. https://doi.org/10.1109/ICICNIS66685.2025.11315590

2024

S.No.	Publications
1	Singh, Davinder Paul, P. Jagadeesan, L. B. Abhang, Senthil Kumar, and Veeraraghavan Vishnu Priya. "A Review of Plant Disease Identification Using Computational Techniques." In Proceedings of the IEEE 2024 First International Conference on Technological Innovations and Advance Computing (TIACOMP), 2024. https://www.computer.org/csdl/proceedingsarticle/tiacomp/2024/921100a478/21HRMXibcc0.
2	G, Shanthi. K., A. Mary Joy Kinol, Santhi S., and K. Kannan. “Real-Time FPGA Integration for ECG Monitoring: Bidirectional Recurrent Chimp Search Model.” IETE Journal of Research 70, no. 8 (2024): 6848–6863. https://doi.org/10.1080/03772063.2024.2311744.
3	Santhi, S., and K. K. S. “Design and Development of Fire Detection Using Deep Learning Algorithm.” In 2024 International Conference on Science Technology Engineering and Management (ICSTEM), 1–6. Coimbatore, India, 2024. https://doi.org/10.1109/ICSTEM61137.2024.10560636.
4	Santhi, S., M. Murugan, T. Srinivasan, and S. K. G. “Corn Leaf Disease Detection Using Deep Learning Techniques.” In 2024 2nd International Conference on Sustainable Computing and Smart Systems (ICSCSS), 1536–1540. Coimbatore, India, 2024. https://doi.org/10.1109/ICSCSS60660.2024.10625229.
5	Santhi, S., M. M., V. R., and G. R. M. “Corn Leaf Disease Detection Using YOLOv5.” In 2024 International Conference on Inventive Computation Technologies (ICICT), 1335–1338. Lalitpur, Nepal, 2024. https://doi.org/10.1109/ICICT60155.2024.10544783.
6	Surya, V., and S. Santhi. “Smart Agriculture: Advanced Rice Disease Detection Using YOLOv10 for Enhanced Crop Health Management.” In 2024 3rd International Conference on Automation, Computing and Renewable Systems (ICACRS), 1733–1737. Pudukkottai, India, 2024. https://doi.org/10.1109/ICACRS62842.2024.10841505.
7	Alfurhood, Badria Sulaiman, Wadi B. Alonazi, K. Arunkumar, S. Santhi, Jamal Fadhil Tawfeq, Tariq Rasheed, and Parthasarath Poovendran. "Improving Holistic Business Intelligence with Artificial Intelligence for Demand Forecasting." Journal of Multiple-Valued Logic & Soft Computing 42, no. 1-3 (2024): 241. ISSN 1542-3980

2023

S.No.	Publications
1	S Sesha Vidhya, S Rukmani Devi, K G Shanthi, S Santhi, “Performance analysis of triple-band miniaturized hexagonal ultra-wideband antenna for wireless body worn applications,” Automatika, Journal for Control, Measurement, Electronics, Computing and Communications, 2023. DOI: 10.1080/00051144.2023.2246246.
2	Suresh Chandrasekar, Karthik Subburathinam, Srihari Kannan, “Analysis For Heart Disease Prediction Using Deep Neural Network And Vgg_19 Convolution Neural Network,” International Journal of Industrial Engineering: Theory, Applications and Practice, 2023. DOI: 10.23055/ijietap.2023.30.2.8603.
3	G. N. Vivekananda, Saman M. Almufti, C. Suresh, Salomi Samsudeen, Mohanarangan Veerapperumal Devarajan, R. Srikanth, S. Jayashree, “Retracing-efficient IoT model for identifying the skin-related tags using automatic lumen detection,” Intelligent Data Analysis, 2023. DOI: 10.3233/IDA-237442.
4	K G Shanthi, Rukmani D Devi, Sesha Vidhya Sudharsanam, S Santhi, A Kalaiselvi, G A Harinee, “Predictive Analytics for Stress Management in the Digital Workplace Using IoT,” Sustainable Communication Networks and Application (ICSCNA), November 2023. DOI: 10.1109/ICSCNA58489.2023.10370408.
5	S Santhi, Murugan Marimuthu, K Sampathkumar, “Disease Identification Using Deep Learning Techniques,” Pervasive Computing and Social Networking (ICPCSN), June 2023. DOI: 10.1109/ICPCSN58827.2023.00110.
6	K Sumathi, D Nageswari, S Santhi, R Revathi, “Design of Quadruple Band Toyota Logo Shaped Monopole Micro-Strip Antenna,” Pervasive Computing and Social Networking (ICPCSN), 19-20 June 2023. DOI: 10.1109/ICPCSN58827.2023.00211.
7	Sharanya Selvaraj, M Prakash, Senthilkumar Jayaramalingam, “Blockchain enabled framework for industrial maintenance,” Recent Innovations in Science and Technology, 2023. DOI: 10.1063/5.0196026.
8	S Biruntha, M Revathy, Raashma Mahaboob, V Meenakshi, “Comprehensive Review of Deep learning Techniques in Electronic Medical Records,” ITM Web, 2023. DOI: 10.1051/itmconf/20235603001.
9	J Senthil Kumar, S. Pandiarajan, J. Karthika Sorna Ilakkia, “Automated Malaria Parasite Detection for Legal Blindness Accessibility using Hybrid Deep Learning Techniques,” Inventive Computation Technologies (ICICT), 26-28 April 2023. DOI: 10.1109/ICICT57646.2023.10134430.
10	S Renukalatha, J Senthil Kumar, A Sangeetha, M Hema, Ashok Kumar, R Ramesh Singh, “Determination of Hemoglobin Percentage Through K-Means Algorithm and Image Processing for White Blood Cell Diagnosis,” Smart Electronics and Communication (ICOSEC). DOI: 10.1109/ICOSEC58147.2023.10275883.
11	S Pandiarajan, J Senthilkumar, A Ramkumar, B Parkavi, “Authentication For Door Lock System Through Bio Scanning Ear Image Processing System,” Journal of Data Acquisition and Processing, 2023. Link.
12	S Vyshali, S Raja Mohamed, “Fall Detection & Daily Living Activity Recognition using CNN,” Inventive Computation Technologies (ICICT), 26-28 April 2023. DOI: 10.1109/ICICT57646.2023.10133971.
13	R Bavyaa, S Raja Mohamed, K Sathyanarayanan, V Mithun, “LIFELINE – A Unified Solution for Healthcare Donation,” Advancement in Computation & Computer Technologies (InCACCT), 05-06 May 2023. DOI: 10.1109/InCACCT57535.2023.10141691.
14	R Renugadevi, S Vaishnavi, S Santhi, S Pooja, “Ladies Finger Leaf Disease Detection using CNN,” Applied Artificial Intelligence and Computing (ICAAIC), 04-06 May 2023. DOI: 10.1109/ICAAIC56838.2023.10140976.
15	T Murali, A Anu Priya, “Production Enhancement and Process Analysis for Pharmaceutical Industries,” Electronics and Sustainable Communication Systems (ICESC). DOI: 10.1109/ICESC57686.2023.10193278.
16	S Deepa, S Banupriya, “Skin Cancer Detection using Convolutional Neural Network,” Inventive Computation Technologies (ICICT), 26-28 April 2023. DOI: 10.1109/ICICT57646.2023.10134001.
17	M Jayanthi, J Alwin Ajay, Kavya Vijayakumar, G Surya Prakash, “Detection and Decryption of Ransomware,” Applied Artificial Intelligence and Computing (ICAAIC). DOI: 10.1109/ICAAIC56838.2023.10140747.
18	M Jayanthi, S Rajeswari, “Method for Recognizing Hand Gestures in Real-Time Across Multiple Sensors Using Machine Learning,” Advance Computing and Innovative Technologies in Engineering (ICACITE). DOI: 10.1109/ICACITE57410.2023.10183177.
19	C Suresh, L Dinesh Kumar, “Real Time Automatic Sign Language Translation Machine Learning & IoT,” Inventive Computation Technologies (ICICT). DOI: 10.1109/ICICT57646.2023.10134503.
20	C Suresh, S Gokilapriya, “Characteristics Removal of Tumefaction in Brain from Diagnosis Radiology Images Using Machine Learning,” Advanced Computing and Communication Systems (ICACCS), 17-18 March 2023. DOI: 10.1109/ICACCS57279.2023.10112934.
21	Suresh Chandrasekaran, “Differential Evolution Framework To Improve The Network Lifetime Of IoT-MANETs,” ICTACT Journal on Communication Technology, Dec. 2023. Link.
22	C Priyanka, S Pooja, “Hybrid Deep Learning Techniques for Glaucoma detection,” Electronics and Sustainable Communication Systems (ICESC), 06-08 July 2023. DOI: 10.1109/ICESC57686.2023.10193355.
23	T Vijayakumar, S Santhi, M Gokila, “A Deep Learning - based Approach for Tomato Plant Leaf Disease Detection and Classification,” Smart Electronics and Communication (ICOSEC), 20-22 October 2022. DOI: 10.1109/ICOSEC54921.2022.9952007.
24	K G Shanthi, S Sesha Vidhya, S Santhi, P Sai Dinesh, P Shashank Reddy, M Venkata Prasad, “Handy Non-Invasive Blood Glucose Estimator using Arduino and NodeMCU,” Intelligent Data Communication Technologies and Internet of Things (IDCIoT), 05-07 January 2023. DOI: 10.1109/IDCIoT56793.2023.10053485.
25	B Anitha, S Santhi, “Disease Prediction in Coconut Leaves using Deep Learning,” Sustainable Computing and Data Communication Systems (ICSCDS), 23-25 March 2023. DOI: 10.1109/ICSCDS56580.2023.10104940.
26	S. Madeline Arockiya Shiney, R Sumathy, “Custom Convolutional Neural Network Method Based Alzhemeir’s Disease Classification,” International Journal of Research in Engineering and Science (IJRES), March 2023. Link.
27	T Vijayakumar, S Santhi, K G Shanthi, M Gokila, “Cryptocurrency Price Prediction using LSTM and Recurrent Neural Networks,” Applied Artificial Intelligence and Computing (ICAAIC), 04-06 May 2023. DOI: 10.1109/ICAAIC56838.2023.10141048.
28	M Gayathiri, S Santhi, “Design and Analysis of Low Power Energy Efficient Spin-based MCML,” Inventive Computation Technologies (ICICT), 26-28 April 2023. DOI: 10.1109/ICICT57646.2023.10134010.

2022

S.No.	Publications
1	S Santhi, M Chairman, “Oral Disease Detection from Dental X-Ray Images using Densenet,” Inventive Research in Computing Applications (ICIRCA), 21-23 September 2022. DOI: 10.1109/ICIRCA54612.2022.9985687.
2	M Gokila, S Santhi, “A Review on Deep Learning Technique on Basis of Different Types of Crop Diseases,” Computing, Communication, Electrical and Biomedical Systems, EAI/Springer Innovations in Communication and Computing, 2022. DOI: 10.1007/978-3-030-86165-0_54.
3	P Dhanalakshmi, N Sivakumar, Kukati Aruna Kumari, Senthil Kumar, Poorna Chandra Reddy Alla, “Image-based classification of healthy and diseased bell pepper using the transfer learning method,” International Journal of Health Sciences (IJHS), 2022. DOI: 10.53730/ijhs.v6nS4.9631.

Department of Electronics and Communication Engineering

2025

S.No.	Publications
1	Thangaraj, Kokilavani, Rajarajeswari Indiran, Vasantharaj Ananth, and Mohan Raman. 2025. "Enhanced Lithium-Ion Battery State-of-Charge Estimation for Electric Vehicles Using the AOA-DNN Approach." Optimal Control Applications and Methods. https://doi.org/10.1002/oca.3191.
2	Maria Antony, S., and Poongodi P. 2025. "Adaptive Prairie Dog Optimization-Based Variable Length Conditional Counter for Designing Multiplier." Integration. https://doi.org/10.1016/j.vlsi.2024.102243.

2024

S.No.	Publications
1	Thangaraj, Kokilavani, Rajarajeswari Indiran, Vasantharaj Ananth, and Mohan Raman. 2025. "Enhanced Lithium-Ion Battery State-of-Charge Estimation for Electric Vehicles Using the AOA-DNN Approach." Optimal Control Applications and Methods. https://doi.org/10.1002/oca.3191.
2	Aarthi, E., M. S. Sheela, and Vasantharaj A. 2024. "Integrating Neural Network-Driven Customization, Scalability, and Cloud Computing for Enhanced Accuracy and Responsiveness for Social Network Modelling." Social Network Analysis and Mining 14:139. https://doi.org/10.1007/s13278-024-01302-0.
3	Ramesh, J., S. Nithyadevi, and V. Govindaraj. 2024. "Fault Classification in Digital to Analog Converter Using Machine Learning." International Journal of Electronics, 1–20. https://doi.org/10.1080/00207217.2024.2429149.
4	Kavitha, V. P., B. Sakthivel, S. Deivasigamani, K. Jayaram, R. Badlishah Ahmad, and I. Sory Keita. 2024. "An Efficient Modified Black Widow Optimized Node Localization in Wireless Sensor Network." IETE Journal of Research 70 (12): 8404–8413. https://doi.org/10.1080/03772063.2024.2384486.
5	Kumarganesh, S., M. Murugesan, C. Ganesh, et al. 2024. "Hybrid Plasmonic Biosensors with Deep Learning for Colorectal Cancer Detection." Plasmonics. https://doi.org/10.1007/s11468-024-02568-y.
6	Natarajan, K., P. Natarajan, S. Muthusamy, et al. 2024. "A Novel Method for Bioinformatics Analysis in Gene Expression Profiling Framework for Personalized Healthcare Applications." Multimedia Tools and Applications. https://doi.org/10.1007/s11042-024-20066-5.
7	B. A., Sapna, and K. Ramasamy. 2024. "A Flexible Wideband Wearable CPW Antenna for WBAN Application." Frequenz. https://doi.org/10.1515/freq-2024-0142.
8	Abdulkareem, Bijimanzil, Sapna, and Ramasamy Kuppusamy. 2024. "Compact Multiband Cuff Button Antenna for WBAN Application." International Journal of Microwave and Wireless Technologies, 1–10. https://doi.org/10.1017/S1759078724001223.
9	D. M., D. P., S. P. S., G. P., E. S. Gnanadoss, and M. P. Mohandass. 2024. "Enhancing Endurance Mileage in Electric Vehicles Through In-Wheel Switched Reluctance Motor Design." 2024 5th International Conference on Circuits, Control, Communication and Computing (I4C), Bangalore, India, 75–80. https://doi.org/10.1109/I4C62240.2024.10748462.
10	Tamilselvan, S., N. Prakash, S. Boopathy, R. Krishnaveni, Rajesh Singh, and Raman Kumar. 2024. "A Review on the Effects of Nano-Additives in Alternative Fuel for CI Engines on Performance and Emission Characteristics." Euro-Asian Conference on Sustainable Nanotechnology, Environment, & Energy (SNE2-2024). https://doi.org/10.1051/e3sconf/202458803018.
11	Krishnaveni, R., S. Tamilselvan, N. Prakash, K. Haridass, S. M. Harish, and U. Lalith Kumar. 2024. "Classifying Rice Leaf Diseases Through CNN for Sustainable Agriculture." IOP Conference Series: Earth and Environmental Science. https://doi.org/10.1088/1755-1315/1375/1/012001.
12	Gomathy, B., T. Jayachitra, R. Rajkumar, V. Lalithamani, G. S. Pradeep Ghantasala, I. Anantraj, C. Shyamala, G. Vinoth Rajkumar, and S. Saranya. 2024. "Adversarial Training for Robust Natural Language Processing: A Focus on Sentiment Analysis and Machine Translation." Communication on Applied Nonlinear Analysis. https://doi.org/10.52783/cana.v31.1231.
13	Anandavalli, R., K. Karthigadevi, G. Elizabeth Rani, M. Sakthimohan, and G. Srinivasagan. 2024. "A Flutter App for AI-Based Plant Disease Detection." 2024 8th International Conference on Electronics, Communication and Aerospace Technology (ICECA), Coimbatore, India, 661–666. https://doi.org/10.1109/ICECA63461.2024.10801001.
14	Sundravadivelu, K., S. Dheenath, M. Sakthimohan, G. Elizabeth Rani, and M. Thenmozhi. "Automated Apple Wax Detection with Convolutional Neural Networks." 2024 8th International Conference on Electronics, Communication and Aerospace Technology (ICECA), Coimbatore, India, 2024, 656-660. https://doi.org/10.1109/ICECA63461.2024.10800862.
15	Rani, G. Elizabeth, A. S. Ashok, K. Keerthana, A. Krithika, and M. Sakthimohan. "An Automated Class Intimation System for Educational Institutions using Artificial Neural Networks." 2024 3rd International Conference on Applied Artificial Intelligence and Computing (ICAAIC), Salem, India, 2024, 1-6. https://doi.org/10.1109/ICAAIC60222.2024.10575120.
16	M, S., S. S, P. R, H. K. R, and E. R. G. "Automated Smart Home Assistive System Implementation for Physically Impaired Community Using Eye Gestures." 2024 10th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India, 2024, 81-85. https://doi.org/10.1109/ICACCS60874.2024.10717287.
17	G, E. R., K. D., and S. M. "Boosting Fake News Detection Accuracy: A Deep Dive into LSTM Classifiers." 2024 10th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India, 2024, 662-668. https://doi.org/10.1109/ICACCS60874.2024.10717086.
18	M, T., S. M., E. R. G., J. S., K. Karthigadevi, and S. K. V. "Elliptic Curve Cryptography: Protecting Healthcare Data in the Digital Age." 2024 5th International Conference on Electronics and Sustainable Communication Systems (ICESC), Coimbatore, India, 2024, 830-836. https://doi.org/10.1109/ICESC60852.2024.10689809.
19	Karthigadevi, K., M. Sakthimohan, S. Tamilselvan, B. Thiyagarajan, G. Elizabeth Rani, and V. Sanjeevi Kumar. "Enhanced 16 × 16 Dadda Multiplier Using Kung-Brent Adder for Superior Parallel Processing Performance." 2024 8th International Conference on Electronics, Communication and Aerospace Technology (ICECA), Coimbatore, India, 2024, 80-85. https://doi.org/10.1109/ICECA63461.2024.10801100.
20	Thilagavathi, C., and S. Thilagamani. "Enhanced Skin Disease Detection Using Deep Learning with Fully-Convolutional Residual Networks and Lesion Index Calculation Unit." 2024 9th International Conference on Communication and Electronics Systems (ICCES), Coimbatore, India, 2024, 1741-1746. https://doi.org/10.1109/ICCES63552.2024.10860181.
21	M, G. M., K. K., E. R. G., and S. M. "Enhancing Breast Cancer Detection: A Comparative Analysis of Pre-Processing Techniques for Mammogram Image." 2024 Third International Conference on Electrical, Electronics, Information and Communication Technologies (ICEEICT), Trichirappalli, India, 2024, 1-6. https://doi.org/10.1109/ICEEICT61591.2024.10718416.
22	R, K., S. B. A., Y. P., B. R. A., and S. T. "A Compact Conformal Antenna for Capsule Endoscopy." 2024 Asia Pacific Conference on Innovation in Technology (APCIT), Mysore, India, 2024, 1-4. https://doi.org/10.1109/APCIT62007.2024.10673623.
23	Abdulkareem, Sapna Bijimanzil, Ramasamy Kuppusamy, Ragu Mani, Vaishnavi Galla, and Makkini Charan Kumar. "Dual Band Polygonal Slot Antenna for Early Detection of Breast Cancer." International Journal of Biomedical Engineering and Technology, 2024. https://doi.org/10.1504/IJBET.2024.140703.
24	B. A., S., R. K., N. Padala, J. Bandi, and A. D. T. "A Miniaturized Implantable Antenna for Health Care Monitoring." 2024 Asia Pacific Conference on Innovation in Technology (APCIT), Mysore, India, 2024, 1-4. https://doi.org/10.1109/APCIT62007.2024.10673717.
25	M, D., D. P., S. Singh, S. P. Vedpathak, V. A., and M. R. C. "Investigation of High Switching Frequency Dual Active Bridge Converter for Electric Vehicle Application." 2024 5th International Conference on Circuits, Control, Communication and Computing (I4C), Bangalore, India, 2024, 69-74. https://doi.org/10.1109/I4C62240.2024.10748456.
26	M, D. P., S. P. S., G. P., E. S. Gnanadoss, and M. P. Mohandass. "Enhancing Endurance Mileage in Electric Vehicles Through in-Wheel Switched Reluctance Motor Design." 2024 5th International Conference on Circuits, Control, Communication and Computing (I4C), Bangalore, India, 2024, 75-80.

2023

S.No.	Publications
1	E. Gomathi, M. Jayasheela, M. Thamarai, M. Geetha, “Skin cancer detection using dual optimization based deep learning network,” Biomedical Signal Processing and Control, Volume 84, July 2023, 104968. DOI: 10.1016/j.bspc.2023.104968.
2	M. Geetha, R. Vijayabhasker, Suresh Seetharaman, “Computerised Gate Firing Control for 17-Level MLI using Staircase PWM,” Computer Systems Science and Engineering, 2023, 44(1), 813-832. DOI: 10.32604/csse.2023.025575.
3	A.U. Rao, K. Ramasamy, A. Pradeep, P.S. Srikanth Karumari, and Bhiksha Gugulothu, “Effect of SC parameters on material characteristics for AI 5083-based hybrid matrix composites using Taguchi RSN technique,” Journal of Nanomaterials, Volume 2022. DOI: 10.1155/2022/7654128.
4	Gowrishankar Raju, Surrya Prakash DilliBabu, Anu Tonk, Sathish Kumar Shanmugam, “A Comparative study for Enhancing Solar still performance and efficiency through PCM-Integrated FIN Design,” Thermal Science, Year 2023, Vol. 27, No. 6B, pp. 4841-4850. DOI: 10.2298/TSCI221113249.
5	Ramasamy M. Kuppusamy and Sapna B. Abdulkareem, “Performance analysis of a flexible wearable antenna with low SAR for biomedical application,” De Gruyter, July 3, 2023. DOI: 10.1515/freq-2023-0005.
6	K. Ramasamy, B. A. Sapna, and M. Jayasheela, “A Novel wearable Monopole Antenna with controlled SAR using metamaterial,” International Journal of Microwave and Wireless Technologies, Volume 15, Issue 9, 2023. DOI: 10.1017/S1759078723000338.
7	Thamarai Muthusamy and Gomathi Eswaran, “Detection of sugarcane mosaic diseases using deep learning architecture to avoid annealing temperature of PCR primer in laboratory testing,” International Information Engineering Technology and Association. DOI: 10.18280/ts.390135.
8	Vikas Maheshwari, Md Rashid Mahmood, Sumukham Sravanthi, N. Arivazhagan, A. Parimala Gandhi, K. Srihari, R. Sagayaraj, E. Udayakumar, Yuvaraj Natarajan, Prashant Bachanna, and Venkatesa Prabhu Sundramurthy, “Nanotechnology-based sensitive biosensor for COVID-19 prediction using fuzzy logic control,” Journal of Nanomaterials, 2021. DOI: 10.1155/2021/3383146.
9	Srihari Kannan, Gaurav Dhiman, Yuvaraj Natarajan, Ashutosh Sharma, Sachi Nandan Mohanty, Mukesh Soni, Udayakumar Easwaran, “Ubiquitous vehicular ad-hoc network computing using deep neural network with IoT-based bat agents for traffic management,” Electronics, Volume 10, Issue 7. DOI: 10.3390/electronics10070885.
10	R. Gowri, S. Ilakkiyalakshmi, K. Rathipriya, and S. Naveenkumar, “IoT based Poultry Farm Monitoring System with Deep Learning Techniques,” in Innovative Mechanisms for Industry Applications (ICIMIA), Bengaluru, India, 2023, pp. 963-966. DOI: 10.1109/ICIMIA60377.2023.10425921.
11	N. Prakash, N. Kumareshan, S. Tamilselvan, and R. Gowrishankar, “Design and Management of an Intelligent Parking Slot System using Computer Vision,” in Data Science, Agents & Artificial Intelligence (ICDSAAI), Chennai, India, 2023, pp. 1-6. DOI: 10.1109/ICDSAAI59313.2023.10452432.
12	Sakthimohan M, E. R. G, M. P, B. T, A. R, and N. S. T, “An Optimized 44 Braun Multiplier for Parallel Processing Architectures with a 3-bit KSA Adder,” in Intelligent Technologies for Sustainable Electric and Communications Systems (iTech SECOM)*, Coimbatore, India, 2023, pp. 319-324. DOI: 10.1109/iTechSECOM59882.2023.10435221.
13	M. Kameswari, Sakthimohan M, G. Elizabeth Rani, S. Yogesh Kumar, A. Mohan, and K. Ezhilarasan, “Enhancing Security in a Test Portal with Email OTP Verification using HMAC Algorithm,” in Automation, Computing and Renewable Systems (ICACRS), Pudukkottai, India, 2023, pp. 1122-1128. DOI: 10.1109/ICACRS58579.2023.10404196.
14	Tamilselvan, S. Gunavathi, M. Muthusamy, and S. Anithdharsan, “Machine Learning-based Smart Helmet for Air Quality and Harmful Event Finding for the Mining Industry,” in Automation, Computing and Renewable Systems (ICACRS), Pudukkottai, India, 2023, pp. 1433-1438. DOI: 10.1109/ICACRS58579.2023.10405171.
15	Vasantharaj A, M. I. Ahamed, K. Prema, A. Mudigonda, J. B. Sapaev, and K. Thandapani, “Smart Prediction Models for Energy Efficiency in Smart Residential Buildings: A Deep Learning Approach,” in Technological Engineering and its Applications in Sustainable Development (ICTEASD), Al-Najaf, Iraq, 2023, pp. 343-348. DOI: 10.1109/ICTEASD57136.2023.10585084.
16	M. Vinothkumar, A. Vasantharaj, et al., “Advancements in Energy-Autonomous Wireless Sensor Networks: Integrating Simultaneous Energy Harvesting and Ambient Light Sensing Systems,” in Technological Engineering and its Applications in Sustainable Development (ICTEASD), Al-Najaf, Iraq, 2023, pp. 20-24. DOI: 10.1109/ICTEASD57136.2023.10585249.
17	R. Gowrishankar, N. Sathish Kumar, “Analysis of efficient 32-bit adder using tree grafting technique,” Intell. Automat. Soft Comput., vol. 35, no. 1, pp. 1197-1209, 2023. DOI: 10.32604/iasc.2023.025422.
18	Umapathi Krishnamoorthi, Parimala Gandhi Ayyavu, Hitesh Panchal, Dayana Shanmugam, Sukanya Balasubramani, Ali-Jawad Al-Rubae, Ankit D. Oza, Sagram Hembrom, Tvarit Patel, Petrica Vizureanu, Diana Petronela Burduhos-Negris, “Efficient Battery Models for Performance Studies - Lithium Ion and Nickel Metal Hydride Battery,” Batteries, 2023, 9(1), 52. DOI: 10.3390/batteries9010052.
19	Krishnaveni, M. Prabhu, Paveena, Priyanga, Prakash N, Kumareshan N, “Wireless Fuel Measurement System using UWB,” in Computing Methodologies and Communication (ICCMC). DOI: 10.1109/ICCMC56507.2023.10083552.
20	Leo Marshal S, Gokul R, and Sreeharsha KJS, Mrs. M. Geetha, “Autonomous Vehicle Control System Based On Dynamic Traffic Gesture Recognition,” International Journal of Enhanced Research in Science, Technology & Engineering, ISSN: 2319-7463, Vol. 12 Issue 2, February 2023.
21	Gayathri Devi Krishnamoorthy, Kishore Balasubramanian, Shanthi Govindaraj, Parimala Gandhi Ayyavu, Deepak Anna Durai Geetha, “Energy management system using binary particle swarm optimization techniques,” IEEE(2023). DOI: 10.1063/5.0139459.
22	Parimala Gandhi A, Sapna S, Yaswanth K M, Praveen Kumar M, “Calorie estimation of food and beverages using deep learning,” in Computing Methodologies and Communication (ICCMC). DOI: 10.1109/ICCMC56507.2023.10083648.
23	A. Kalaiarasi, A. Narendrakumar, P. Jayabalasubramaniam, N. Kumareshan, N. Prakash, C. Gokul Prasad, “Performance Analysis and Comparison of Speaker Independent Isolated Speech Recognition System,” in Computer Communication and Informatics (ICCCI). DOI: 10.1109/ICCCI56745.2023.10128200.
24	A. Kalaiarasi, S. Raja, N. Kumareshan, M. Pradeepa, N. Arun Vignesh, N. Prakash, “Improving the Quality and Performance of Wireless Ad-hoc Network by Using MMCN Architecture,” in Computer Communication and Informatics (ICCCI). DOI: 10.1109/ICCCI56745.2023.10128173.

2022

S.No.	Publications
1	K. Banu Priya, M. Sandeep Kumar, M. Geetha, J. Prabhu, V. Maheshwari, Sukumar Rajendran, M. Prasanna, and P. Rajendran, “Queueing network model with jockeying to reduce the waiting time in the airport,” International Journal of Systems of System Engineering, 2022. DOI: 10.1504/IJSSSE.2022.10043577.

2021

S.No.	Publications
1	R. Palanikumar, K. Ramasamy, P. Srinivasa Ragavan, “Faulty node detection and recovery scheme for large scale wireless sensor network using hosted cuckoo optimization algorithm,” International Journal of Communication Systems, 2022. DOI: 10.1002/dac.5143.
2	Vikasmaheswari, MD Rashid Mohamad, Sumukham Sravanthi, N. Arivazhagan, A. Parimala Gandhi, K. Srihari, R. Sagayaraj, E. Udayakumar, Yuvaraj Natarajan, Prashant Bachanna, Venkatesa Prabhu Sundramurthy, “Nanotechnology-based sensitive biosensor for COVID-19 prediction using fuzzy logic control,” Nanotechnology-Based Sensitive Biosensors for COVID-19 Prediction Using Fuzzy Logic Control, 2021. DOI: 10.1155/2021/3383146.
3	Srihari Kannan, N. Yuvaraj, Barzan, Abdulazeez Idrees, P. Arulprakash, Vijayakumar Ranganathan, E. Udayakumar, P. Dhinakar, “Analysis of convolutional recurrent neural network classifier for COVID-19 symptoms over computerized tomography images,” International Journal of Computer Applications in Technology, Volume 66, Issue 3-4, Pages 427–432. DOI: 10.1504/ijcat.2021.120453.
4	N. Prakash, E. Udayakumar, N. Kumareshan, K. Srihari, Sachi Nandan Mohanty, “An IoT based gadget for visually impaired people,” Integration of Cloud Computing with Internet of Things, 2021. DOI: 10.1002/9781119769323.ch5.
5	N. Prakash, E. Udayakumar, & N. Kumareshan, “Implementation of smart control of wheelchair for a disabled person,” EAI/Springer Innovations in Communication and Computing (EAISICC), 2021. DOI: 10.1007/978-3-030-77528-5_7.
6	N. Prakash, M. Rajalakshmi, & R. Nedunchezhian, “Throughput enhancement in wireless sensor network by novel genetic algorithm fuzzy method (NGA-F),” VLSI, Communication and Signal Processing, 2021. DOI: 10.1007/978-981-16-2761-3_26.
7	R. Lal Raja Singh, R. Thamizharasan, M. P. Mohandass, E. Udayakumar, “Smart agriculture using IoT for plant pathology and task automation,” Advanced Computing and Communication Systems (ICACCS), 2021. DOI: 10.1109/ICACCS51430.2021.9442047.
8	Udayakumar Easwaran, Yogeshwaran Kandasamy, Ramesh Chellappan, Omprakash Perumal, “An impact of bio materials in lung tumor classification and segmentation using machine learning health care,” Materials Today, Volume 43, Part 5, 2021, Pages 3100-3104. DOI: 10.1016/j.matpr.2021.01.586.
9	E. Udayakumar, C. Ramesh, K. Yogeshwaran, S. Tamilselvan, & K. Srihari, “An enhanced face and iris recognition based new generation security system,” Proceedings of First International Conference on Computing, Communication and Cyber Security (IC4S 2019). DOI: 10.1007/978-981-15-3369-3_62.
10	C. Ramesh, E. Udayakumar, K. Yogeshwaran, P. Omprakash, “An IoT based intelligent control system for physically disabled people,” Cybersecurity in Emerging Digital Era (pp. 130-140), 2021. DOI: 10.1007/978-3-030-84842-2_10.
11	Abinaya B, Santhi S, “A survey on genomic data by privacy-preserving techniques perspective,” Computational Biology and Chemistry, Elsevier, 2021. DOI: 10.1016/j.compbiolchem.2021.107538.
12	M. Kusuma Sri, E. Gomath, “Classification of Breast Cancer Images Using Completed Local Ternary Pattern and Support Vector Machine,” International Journal of Bioinformatics Research and Applications, Vol. 18, No. 1-2, 2021. DOI: 10.1504/ijbra.2022.121769.
13	S. Teitsana Devi, Mr. R Gowrishankar, “Error Resilient Approximate Median Filter for Removing Salt,” International Research Journal of Modernization in Engineering Technology and Science, Volume 7, Issue 7, July 2021.
14	K. Ramasamy, M. Jayasheela, E. Gomathi, E. Udayakumar, “Human Biometric Authentication Using Dental Features,” Indian Journal of Forensic Medicine and Pathology, 14(3): 339-346, 2021. DOI: 10.21088/ijfmp.0974.3383.14321.3.
15	Jayasheela. M, Gomathi. E, Ramasamy. K, “Feature and Segmentation Based Eye Disease Classification Using GLCM and Tree Technique,” Annals of the Romanian Society for Cell Biology, 2021. DOI: 10.26355/eurasia.2021.1.2.

Department of Electrical and Electronics Engineering

2025

S.No.	Publications
1	Mohandass, M. P., and S. Manoharan. “Hybrid Technique Vienna Rectifier Based Topology for FCS Electric Vehicle Using AC–DC Converter.” Analog Integrated Circuits and Signal Processing 122 (2025): 41. https://doi.org/10.1007/s10470-025-02312-4.
2	Poornima, P. U., K. Dhineshkumar, Chunduri Kiran Kumar, S. Sumana, M. V. Rama Sundari, P. Sivaraman, Mohammed Shuaib, and A. Rajaram. “Optimising Rooftop Photovoltaic Adoption in Urban Landscapes: A System Dynamics Approach for Sustainable Energy Transitions.” Biomedical Signal Processing and Control 100, pt. B (2025): 107071. https://doi.org/10.1016/j.bspc.2024.107071.

2024

S.No.	Publications
1	M, D., Samithas, D., and Balachandran, P., et al. “Experimental Analysis of Enhanced Finite Set Model Predictive Control and Direct Torque Control in SRM Drives for Torque Ripple Reduction.” Scientific Reports 14 (2024): 16805. https://doi.org/10.1038/s41598-024-65202-1.
2	Mohanraj, Deepak, et al. “An Improved Finite Set Model Predictive Control of SRM Drive Based on a Voltage Vectors Strategy for Low Torque Ripple.” Heliyon 10, no. 20 (2024): e39598. https://doi.org/10.1016/j.heliyon.2024.e39598.
3	Jenefer, G. G., A. J. Deepa, and M. M. Linda. “Diabetic Prediction and Classification of Risk Level Using ODDTADC Method in Big Data Analytics.” Journal of Combinatorial Optimization 47 (2024): 80. https://doi.org/10.1007/s10878-024-01179-x.
4	T V, G., A. J. D., and M. M. L. “Deep Learning Method for Efficient Cloud IDS Utilizing Combined Behavior and Flow-Based Features.” Applied Intelligence 54 (2024): 6738–6759. https://doi.org/10.1007/s10489-024-05505-y.
5	1. M. P. Mohandass, D. N. Sri. N, S. r. Y and S. A, "An Automated Railway Unguarded Level Crossing using Lab View," 2024 International Conference on IoT Based Control Networks and Intelligent Systems (ICICNIS), Bengaluru, India, 2024, pp. 574-580, doi:10.1109/ICICNIS64247.2024.10823211.
6	M. P. Mohandass, R. R. T, V. A and S. V, "Battery Thermal Management System for Electric Vehicle Using LABVIEW," 2024 International Conference on IoT Based Control Networks and Intelligent Systems (ICICNIS), Bengaluru, India, 2024, pp. 586-592, doi:10.1109/ICICNIS64247.2024.10823360.
7	3. Prakash, G., Krishnan, D., Ramya, G. (2024). Design and Analysis of Structural Health Monitoring System for the Diagnosis of Morphological Deformities of Bolted Structures. In: Owoc, M.L., Varghese Sicily, F.E., Rajaram, K., Balasundaram, P. (eds) Computational Intelligence in Data Science. ICCIDS 2024. IFIP Advances in Information and Communication Technology, vol 717. Springer, Cham. https://doi.org/10.1007/978-3-031-69982-5_20.
8	R. Mythili, D. Revathi, V. Dinesh, K. Udhaya Suriya and V. Ramanathan, "Automatic Railway Signalling System for Accident Prevention," 2024 5th International Conference on Smart Electronics and Communication (ICOSEC), Trichy, India, 2024, pp. 695-699, doi:10.1109/ICOSEC61587.2024.10722485.
9	R. L. R. Singh, V. Thirumalaivasan, N. N. Kumar and R. Adharsh, "Design and Development of Smart System for the Identification and Diversion of Wild Animal in Agricultural Field," 2024 10th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India, 2024, pp. 585-590, doi:10.1109/ICACCS60874.2024.10717270.
10	D. Krishnan, M. R, K. V, R. V, S. M and M. Deepak, "Optimized Design and Deployment of BLDC Motor Poles in E-Vehicle," 2024 International Conference on Science Technology Engineering and Management (ICSTEM), Coimbatore, India, 2024, pp. 1-4, doi: 10.1109/ICSTEM61137.2024.10561152.
11	M. Deepak, K. Dhineshkumar, P. Dineshkumar, P. Palpandian, N. Vengadachalam and J. Manokaran, "Design In-Wheel Switched Reluctance Motor to Endurance Mileage for Electric Vehicle Applications," 2024 IEEE 5th India Council International Subsections Conference (INDISCON), Chandigarh, India, 2024, pp. 1-5, doi: 10.1109/INDISCON62179.2024.10744290.
12	P. Dineshkumar, M. Deepak, A. VasanthaRaj, P. Gopinath, J. Manokaran and K. Dhineshkumar, "Experimental Investigation of The Effect of Titanium And Zirconium Nanoparticles on Single-Phase Transformers," 2024 IEEE 5th India Council International Subsections Conference (INDISCON), Chandigarh, India, 2024, pp. 1-6, doi: 10.1109/INDISCON62179.2024.10744251.
13	D. M, K. M, S. C, M. J and K. K, "Design and Analysis of Different Rotor Structures In-Wheel Brushless DC Motor Performance for Electric Vehicle Applications," 2024 International Conference on Advancements in Power, Communication and Intelligent Systems (APCI), KANNUR, India, 2024, pp. 1-6, doi: 10.1109/APCI61480.2024.10616658.
14	S Devakirubakaran, K Srilakshmi, M Deepak “Mitigating Partial Shading Effects in Photovoltaic System using Intelligent Current Compensation Method” E3S Web of Conferences 547, 02001. 10.1051/e3sconf/202454702001.
15	Deepak, M., C. Bharatiraja, and G. Janaki. “Exploring Multilevel Hysteresis Torque Band Direct Torque Control in Switched Reluctance Motor Drives: Insights into Three- and Four-Phase Systems.” In Proceedings of the 2024 IEEE 4th International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 1–6. Hyderabad, India, 2024. https://doi.org/10.1109/SEFET61574.2024.10718260.
16	Deepak, M., D. P., S. P. S., G. P., E. S. Gnanadoss, and M. P. Mohandass. “Enhancing Endurance Mileage in Electric Vehicles Through In-Wheel Switched Reluctance Motor Design.” In Proceedings of the 2024 5th International Conference on Circuits, Control, Communication and Computing (I4C), 75–80. Bangalore, India, 2024. https://doi.org/10.1109/I4C62240.2024.10748462.
17	Deepak, M., D. P., S. Singh, S. P. Vedpathak, V. A., and M. R. C. “Investigation of High Switching Frequency Dual Active Bridge Converter for Electric Vehicle Application.” In Proceedings of the 2024 5th International Conference on Circuits, Control, Communication and Computing (I4C), 69–74. Bangalore, India, 2024. https://doi.org/10.1109/I4C62240.2024.10748456.
18	Deepak, M., C. S. Kumar, M. Karthick, and J. Manokaran. “Investigation of Different Inner Rotor Structures on BLDC Motors Performance for Traction Applications.” In Proceedings of the 2024 IEEE International Conference on Smart Power Control and Renewable Energy (ICSPCRE), 1–6. Rourkela, India, 2024. https://doi.org/10.1109/ICSPCRE62303.2024.10675063.
19	Dineshkumar, P., M. Deepak, A. VasanthaRaj, P. Gopinath, J. Manokaran, and K. Dhineshkumar. “Experimental Investigation of the Effect of Titanium and Zirconium Nanoparticles on Single-Phase Transformers.” In Proceedings of the 2024 IEEE 5th India Council International Subsections Conference (INDISCON), 1–6. Chandigarh, India, 2024. https://doi.org/10.1109/INDISCON62179.2024.10744251.
20	Kumar, S. V. D., R. Thamizharasan, S. Karthick, D. Arumugam, K. Buvaneswari, and V. Balaji. “Advanced Day-Ahead Photovoltaic Power Prediction Through RNN Modeling: Enhancing Forecast Accuracy for Improved Grid Stability.” In Proceedings of the 2024 9th International Conference on Communication and Electronics Systems (ICCES), 173–178. Coimbatore, India, 2024. https://doi.org/10.1109/ICCES63552.2024.10859878.
21	SatheeshKumar, K. K., G. P. S., S. S., and R. S. “Gesture Controlled Lawn Mower.” In Proceedings of the 2024 4th International Conference on Pervasive Computing and Social Networking (ICPCSN), 809–814. Salem, India, 2024. https://doi.org/10.1109/ICPCSN62568.2024.00136.

2023

S.No.	Publications
1	Shaji, B., R. L. R. Singh, and K. L. Nisha. “High-Performance Fuzzy Optimized Deep Convolutional Neural Network Model for Big Data Classification Based on the Social Internet of Things.” The Journal of Supercomputing 79, no. 9 (January 2023): 9509–9537. DOI: 10.1007/s11227-022-04974-7.
2	Kamalkumar, V., and R. Lal Raja Singh. “Optimum Transistor Sizing of CMOS Differential Amplifier Using Tunicate Swarm Algorithm.” Journal of Circuits, Systems and Computers 32, no. 3 (September 2022). DOI: 10.1142/s0218126623500512.
3	Rajasekaran, S., S. Suresh, A. Ramkumar, and K. Karthikeyan. “A Novel Solar Photovoltaic Integrated Modified SEPIC High Gain DC–DC Converter Using Evolutionary Algorithms for Electric Vehicle Battery Applications.” Journal of Electrical Engineering & Technology 18, no. 5 (March 2023): 3681–3694. DOI: 10.1007/s42835-023-01459-2.
4	Rajasekaran, S., S. Suresh, K. Karthikeyan, and A. Bhuvanesh. “Implementation of an A-Source DC–DC Boost Combination Phase-Shifting Full-Bridge Converter for Electric Car Rapid Charging Applications.” Journal of Electrical Engineering & Technology 18, no. 4 (January 2023): 2871–2884. DOI: 10.1007/s42835-023-01382-6.
5	Geetha, M., R. Vijayabhasker, and S. Seetharaman. “Computerised Gate Firing Control for 17-Level MLI Using Staircase PWM.” Computer Systems Science and Engineering 44, no. 1 (2023): 813–832. DOI: 10.32604/csse.2023.025575.
6	Ragul, R., N. Shanmugasundaram, M. Paramasivam, S. Seetharaman, and S. L. Mary Immaculate. “PV Based Standalone DC-Micro Grid System for EV Charging Station with New GWO-ANFIS MPPTs Under Partial Shading Conditions.” International Transactions on Electrical Energy Systems (March 2023): 1–14. DOI: 10.1155/2023/2073742.
7	Gopinath, B., S. Suresh, and M. Geetha. “Solar Integrated Cascaded Topology of Multilevel Inverter Using Interval Type-2 Fuzzy Logic Controller.” Electric Power Components and Systems 51, no. 20 (May 2023): 2450–2463. DOI: 10.1080/15325008.2023.2210565.
8	Jayabaskaran, S., S. Suresh, B. Gopinath, and M. Geetha. “Solar PV Combined Efficient Torque Control of BLDC Motor Using Salp Swarm Optimization.” Electric Power Components and Systems 51, no. 13 (April 2023): 1338–1354. DOI: 10.1080/15325008.2023.2196679.
9	Seshavarthini, G., S. Suresh, S. Rathinamala, and K. Pradeep. “A Multifunctional EV Charger Using PV Array.” Electronics and Renewable Systems (ICEARS), March 2023. DOI: 10.1109/icears56392.2023.10085326.
10	Singh, R. L. R., B. V, E. J., and S. K. “AI Enabled Smart Campus for Health Safety and Monitoring.” Electronics and Renewable Systems (ICEARS), March 2023. DOI: 10.1109/icears56392.2023.10085423.
11	Lal Raja Singh, R., K. Arulselvan, A. Indhumathi, S. Iswarya, and G. Namitha. “Design and Fabrication of Solar Powered Air Quality Monitoring System.” Electronics and Renewable Systems (ICEARS), March 2023. DOI: 10.1109/icears56392.2023.10085436.
12	Arthi, B., R. Thamizharasan, M. P. Mohandass, and R. L. R. Singh. “Power Quality Enhancement of the Distribution Network by Multilevel STATCOM.” Electronics and Renewable Systems (ICEARS), March 2023. DOI: 10.1109/icears56392.2023.10085590.
13	Pushpalatha, N., S. Batcha, V. Yesvanthkrishna, S. Rathinamala, B. P. Devi, and G. V. “Gesture-Based Control of a Bionic Arm – A Prototype Design.” Computing Methodologies and Communication (ICCMC), February 2023. DOI: 10.1109/iccmc56507.2023.10084175.
14	Rathinamala, S., Karthikeyan, A., Abishek, R., and C. K. Kannan. “Automatic Attendance Monitoring System Using LBPH and HAAR Algorithm.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10112924.
15	Aarthi, M. S., S. Rathinamala, K. Satheeshkumar, and S. Chandarakala. “Power Quality Enhancement in Multi-Microgrids Using Hybrid Energy Storage System.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10113071.
16	Mohandass, M. P. “IoT Based Traffic Management System for Emergency Vehicles.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10112694.
17	Mohandass, M. P., G. Arun, J. Chitra, G. M. Lonare, and J. Patil. “AI Based Gesture Controlled Smart Bionic Arm.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10112857.
18	Mohandass, M. P., S. T. Akhil Kumar, G. B. Dhas, P. Praveen, and K. Selvakumar. “Unmanned Research and Monitoring Vehicle.” Sustainable Computing and Data Communication Systems (ICSCDS), March 2023. DOI: 10.1109/icscds56580.2023.10104705.
19	Jayabaskaran, G., and S. Suresh. “Modified PI Controller for BLDC Motor in Electric Vehicle Applications.” Computer Communication and Informatics (ICCCI), January 2023. DOI: 10.1109/iccci56745.2023.10128497.
20	Thamizharasan, R., V. Anbarasan, R. Lakshmi Priya, and T. Lenin Joshua. “Solar PV Array Based Multi-Functional Smart EV Charger.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10112788.
21	Satheeshkumar, K., Ruban Sakaravarthi, M. B., Santhiya, S., and Adhithiyan, A. “Deep Analysis on Patient Health Records Using Augmented Reality.” Electronics and Renewable Systems (ICEARS), March 2023. DOI: 10.1109/icears56392.2023.10085440.
22	Elakkiya, K. M., K. SatheeshKumar, S. Rathinamala, and K. Pradheep. “Energy Management System Based Hybrid Energy Storage System Using Supercapacitor for EV.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10113062.
23	Barathkumar, T., S. Saran, S. Sujitha, and R. Vikash. “Braille Based Mobile Communication for Deaf and Blind People.” Advanced Computing and Communication Systems (ICACCS), March 2023. DOI: 10.1109/icaccs57279.2023.10112705.
24	Subramaniam, A., and L. R. S. Ravi Singh. “Optimal Planning and Allocation of Plug-in Hybrid Electric Vehicles Charging Stations Using a Novel Hybrid Optimization Technique.” PLOS ONE 18, no. 7 (July 2023): e0284421. DOI: 10.1371/journal.pone.0284421.
25	Jayalakshmi, J., and M. Mary Linda. “Piecewise Linear Approximation for Identifying Wind Power Ramp Events.” Automatika 64, no. 4 (October 2023): 1306–1314. DOI: 10.1080/00051144.2023.2241772.
26	Janakiraman, B., S. Prabu, M. Senthil Vadivu, and D. Krishnan. “Detection of Ovarian Follicles Cancer Cells Using Hybrid Optimization Technique with Deep Convolutional Neural Network Classifier.” Journal of Intelligent & Fuzzy Systems 45, no. 6 (December 2023): 9347–9362. DOI: 10.3233/jifs-231322.
27	Kamalkumar, V., and R. L. R. Singh. “Design and Development of Low Power and Area Efficient Design for VLSI Circuits.” September 2023. DOI: 10.1109/icosec58147.2023.10276181.
28	K, A., and L. R. Singh R. “Deep Learning-Based Diabetic Retinopathy Detection Using ResNet34 Model.” Circuit Power and Computing Technologies (ICCPCT), August 2023. DOI: 10.1109/iccpct58313.2023.10245965.
29	Rathinamala, S., S. Manoharan, S. Chandrakala, and K. Ramash Kumar. “Performance Improvement of Hybrid System Using Bidirectional MIEC for Portable Device Charger.” Mathematical Problems in Engineering 2023, no. 1 (January 2023). DOI: 10.1155/2023/2482533.
30	Batcha, S., M. P. Mohandass, P. A. Prassath, N. Pushpalatha, K. Karthikeyan, and S. L. Abinandhan. “Agriculture Based Information Transferring Protocol for Effective Communication.” Electrical, Electronics, Information and Communication Technologies (ICEEICT), April 2023. DOI: 10.1109/iceeict56924.2023.10156930.

2022

S.No.	Publications
1	Vijayakumar, S., S. Manickam, S. Seetharaman, T. V. J. Rao, D. Pounraj, and H. P. Pydi. “Examination of Friction Stir-Welded AA 6262/5456 Joints Through the Optimization Technique.” Advances in Materials Science and Engineering 2022 (September 2022): 1–11. DOI: 10.1155/2022/4527595.
2	Gugulothu, B., P. Anusha, M. N. Swapna Sri, S. Vijayakumar, R. Periyasamy, and S. Seetharaman. “Optimization of Stir-Squeeze Casting Parameters to Analyze the Mechanical Properties of Al7475/B4C/Al2O3/TiB2 Hybrid Composites by the Taguchi Method.” Advances in Materials Science and Engineering 2022 (September 2022): 1–9. DOI: 10.1155/2022/3180442.
3	Santhoshkumar, R., S. Suresh, B. Sridhar, B. Marisekar, and P. Deepa. “Proposal and Execution of PLC Based Controller for AC Coaches in Indian Railway.” Augmented Intelligence and Sustainable Systems (ICAISS), November 2022. DOI: 10.1109/icaiss55157.2022.10010732.
4	Prakash, G., K. Dhineshkumar, T. Muthamizhan, and P. Rathnavel. “A Review of Multilevel Inverter Topologies for Solar Photovoltaic System.” Computer, Power and Communications (ICCPC), December 2022. DOI: 10.1109/iccpc55978.2022.10072169.
5	Krishnan, D., G. Prakash, N. Vengadachalam, R. Amaleswari, and K. Eswaramoorthy. “Simulation of Reduced Switch Multilevel Inverter with New Topology for Less THD.” Computer, Power and Communications (ICCPC), December 2022. DOI: 10.1109/iccpc55978.2022.10072047.
6	Prathibha, Suresh, Mythili R., and Divyasre. “Fault Tolerant Capability for Brushless Direct Current (BLDC) Motor Using PIC Microcontroller.” International Journal of Electrical Engineering and Technology 13, no. 6 (June 2022): 11–24. DOI: 10.17605/OSF.IO/J7D.
7	Prathibha, Suresh, Mythili R., and Divyasre. “Control of the Brushless Direct Current (BLDC) Motor by Using IoT.” International Journal of Electrical Engineering and Technology 13, no. 6 (June 2022): 1–10. DOI: 10.17605/OSF.IO/DS4CY.

Department of Mechanical Engineering

2024

S.No.	Publications
1	Snowlin, V., H. Joy Prabu, A. Felix Sahayaraj, I. Johnson, Ebenezer Thaninayagam, R. R. Gopi, J. Salamon, and A. Simi. "Solar Assisted Removal of Methylene Blue Dye from Wastewater Using Zinc-Metal Organic Framework (Zn-MOF)." Journal of Inorganic and Organometallic Polymers and Materials 34, no. 1 (2024): 251-265. https://doi.org/10.1007/s10904-023-02823-5.
2	Suyambulingam, Indran, Jenish Iyyadurai, Felix Sahayaraj Arockiasamy, Divya Divakaran, and Suchart Siengchin. "Tribological Characterization and Performance of Biocomposites." In Biocomposites: Bio-Based Fibers and Polymers from Renewable Resources, 117-142. Woodhead Publishing, 2024. https://doi.org/10.1016/B978-0-323-97282-6.00016-5.
3	Ramesh, Manickam, Tamil Selvan Manickam, Felix Sahayaraj Arockiasamy, Balakrishnan Ponnusamy, Shruthi Senthilraj, Dharshini Chellamuthu, and Ponraj Palanisamy. "Revolutionizing Biomedicine: A Comprehensive Review of Polymer Composite Materials." Engineering Proceedings 61, no. 1 (2024): 17. https://doi.org/10.3390/engproc2024061017.
4	Ramesh, Manickam, Tamil Selvan Manickam, Felix Sahayaraj Arockiasamy, Balakrishnan Ponnusamy, Rishiprakash Sivakumar, Princy Sivakumar, and Prethiga Kandasamy. "Powering the Future: A Comprehensive Review of Polymer Composite Energy Storage Applications." Engineering Proceedings 61, no. 1 (2024): 24. https://doi.org/10.3390/engproc2024061024.
5	Rajaram, Srinivasan, Thirugnanam Subbiah, Felix Sahayaraj Arockiasamy, and Jenish Iyyadurai. "Transforming Agricultural Waste into Sustainable Composite Materials: Mechanical Properties of Tamarindus Fruit Fiber (TFF)-Reinforced Polylactic Acid Composites." Engineering Proceedings 61, no. 1 (2024): 32.
6	Kamalakannan, Venkatesan, Srinivasan Rajaram, Jenish Iyyadurai, and Felix Sahayaraj Arockiasamy. "Fundamental Study on Influence of Independent Factors on Response Variable Using Response Surface Methodology and Taguchi Method." Engineering Proceedings 61, no. 1 (2024): 37. https://doi.org/10.3390/engproc2024061037.
7	Ramadoss, Prem Kumar, Muthukrishnan Mayakrishnan, and Felix Sahayaraj Arockiasamy. "Discarded Custard Apple Seed Powder Waste-Based Polymer Composites: An Experimental Study on Mechanical, Acoustic, Thermal and Moisture Properties." Iranian Polymer Journal 33, no. 4 (2024): 461-479. https://doi.org/10.1007/s13726-023-01266-6 .
8	Periasamy, Diwahar, Prakalathan Karuppiah, Bharathi Manoharan, Felix Sahayaraj Arockiasamy, Sathish Kannan, Vinayagam Mohanavel, Palanivel Velmurugan, Natarajan Arumugam, Abdulrahman I. Almansour, and Subpiramaniyam Sivakumar. "Assessing the Recycling Potential of Thermosetting Polymer Waste in High-Density Polyethylene Composites for Safety Helmet Applications." e-Polymers 24, no. 1 (2024): 20230080. https://doi.org/10.1515/epoly-2023-0080 .
9	Felix Sahayaraj, A., M. Sasi Kumar, S. Sathish, S. Gokulkumar, I. Jenish, and M. Makeshkumar. "Fire Retardant Potential of Natural Fiber Reinforced Polymer Composites: A Review." Polymer-Plastics Technology and Materials 63, no. 7 (2024): 771-797. https://doi.org/10.1080/25740881.2024.2303608 .
10	Raja, M. Vimal, K. Manonmani, and A. Felix Sahayaraj. "Investigation on Electrical Discharge Machining Parameters of Aluminium7075/Boron Carbide/Titanium Diboride Hybrid Composites by Grey Relational Analysis." Proceedings of the National Academy of Sciences, India Section A: Physical Sciences 94, no. 3 (2024): 287-299. https://doi.org/10.1007/s40010-024-00879-7 .
11	Salamon, J., A. Simi, H. Joy Prabu, A. Felix Sahayaraj, I. Johnson, V. Snowlin, R. R. Gopi, and A. Joseph Sagaya Kennedy. "Synthesis and Characterization of Graphene-Doped Co₃O₄ Nanotubes Electrode Material for Supercapacitor Application." Journal of Inorganic and Organometallic Polymers and Materials 34, no. 6 (2024): 2555-257. https://doi.org/10.1007/s10904-023-02995-0 .
12	Selvan, M. Tamil, M. Ramesh, A. Felix Sahayaraj, H. Joy Prabu, and K. J. Nagarajan. "Extraction and Characterization of Novel Fibers from Tecoma stans Linn Bark for Use as Reinforcement in Polymer Composites." International Journal of Biological Macromolecules 270 (2024): 132492. https://doi.org/10.1016/j.ijbiomac.2024.132492 .
13	Maniraj, J., Felix Sahayaraj, Jayant Giri, T. Sathish, and Mohammed Rafi Shaik. "Enhancing Performance of Prosopis juliflora Fiber Reinforced Epoxy Composites with Silane Treatment and Syzygium cumini Filler." Journal of Materials Research and Technology 31 (2024): 93-108. https://doi.org/10.1016/j.jmrt.2024.06.058 .
14	Sinthiya, P. Alwin, I. Johnson, H. Joy Prabu, A. Felix Sahayaraj, and M. Tamil Selvan. "Extraction of Cellulose Nanocrystals from Cissus quadrangularis for Sustainable Biocomposite Production." Biomass Conversion and Biorefinery (2024): 1-13. https://doi.org/10.1007/s13399-024-05820-x .
15	Sankaran, Vigneshwaran, A. John Rajan, Senthil Kumaran Selvaraj, Swaminathan Jose, Vincent H. Wilson, K. Arjun Singh, A. Felix Sahayaraj, and Albert E. Patterson. "Interlaminar Tensile Properties of Raw and Carbon Fiber‐Wrapped Additively Manufactured Polyetherimide." Polymer Engineering & Science 64, no. 9 (2024): 4406-4420. https://doi.org/10.1002/pen.26856 .
16	Boopathiraja, K. P., R. Ramamoorthi, P. Hariprasad, and Felix Sahayaraj Arockiasamy. "Enhancing Microstructural and Mechanical Properties of Magnesium AZ31 Matrix Composites Through Friction Stir Processing Incorporating Silicon Carbide, Titanium Carbide, and Graphite Particles." Materials Research Express 11, no. 7 (2024): 076507. https://doi.org/10.1016/j.jmrt.2024.01.182 .
17	Ramesh, M., D. Ravikanth, M. Tamil Selvan, A. Felix Sahayaraj, and A. Saravanakumar. "Extraction and Characterization of Bougainvillea glabra Fibers: A Study on Chemical, Physical, Mechanical and Morphological Properties." International Journal of Biological Macromolecules 275 (2024): 133787. https://doi.org/10.1016/j.ijbiomac.2024.133787 .
18	Salamon, J., A. Simi, H. Joy Prabu, A. Felix Sahayaraj, A. Joseph Sagaya Kennedy, and I. Johnson. "Synthesis and Characterization of RGO-ZnO/Elwendia persica Seed Reinforced Hybrid Nanocomposite for High-Performance Supercapacitor Applications." Journal of Inorganic and Organometallic Polymers and Materials (2024): 1-14. https://doi.org/10.1007/s10904-024-03293-z .
19	Mani, Sasi Kumar, Sathish Selvaraj, Gokulkumar Sivanantham, Felix Sahayaraj Arockiasamy, Jenish Iyyadurai, and Makeshkumar Mani. "Advancements in Chemical Modifications Using NaOH to Explore the Chemical, Mechanical and Thermal Properties of Natural Fiber Polymer Composites (NFPC)." International Polymer Processing 39, no. 4 (2024): 406–432. https://doi.org/10.1515/ipp-2024-0002 .
20	Sivanantham, Gokulkumar, Thyla Pudukarai Ramaswamy, Sathish Selvaraj, Aravindh Murugan, Felix Sahayaraj Arockiasamy, Sasi Kumar Mani, and Md Elias Uddin. "Adapting a Phenomenological Model for Predicting Acoustical Behaviour of Camellia sinensis/Ananas comosus/E-Glass Fibre-Blended Epoxy Hybrid Composites." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 238, no. 10 (2024): 1956–1980. https://doi.org/10.1177/14644207241237736 .
21	Shini, J. Joe Pushba, H. Joy Prabu, A. Felix Sahayaraj, I. Johnson, Ebenezer Thaninayagam, R. R. Gopi, and V. Snowlin. "Synthesis of Hydroxyapatite (HAp) from Eggshells via Thermal Decomposition Method for the Application of Dye Adsorption." Journal of the Indian Chemical Society 101, no. 10 (2024): 101321. https://doi.org/10.1016/j.jics.2024.101321 .
22	Iyyadurai, Jenish, Ravindra Pratap Singh, Felix Sahayaraj Arockiasamy, V. Mohanavel, Sathish Kannan, Jayant Giri, and Abdullah A. Alarfaj. "Enhancing Tribological Properties of Pump Shafts Through Shot Peening: A Study of Surface Roughness, Hardness and Performance Comparison with Heat Treatment." Materials Research Express 11, no. 10 (2024): 106503. https://doi.org/10.1088/2053-1591/ad7d6f .
23	Sahayaraj, A. Felix, M. Tamil Selvan, I. Jenish, and M. Ramesh. "Extraction and Characterization of Novel Cellulosic Fiber from Jatropha integerrima Plant Stem for Potential Reinforcement in Polymer Composites." Biomass Conversion and Biorefinery 14, no. 20 (2024): 26051-26061. https://doi.org/10.1007/s13399-023-04541-x .
24	Kannan, M., Landa Manohar, A. Agasto, B. Mugeshkannan, A. Felix Sahayaraj, M. Selvan, and S. Ganesh Kumar. "Review on Bio-Inspired Approaches in Polymer Composites: Mimicking Nature for Enhanced Performance." In AIP Conference Proceedings, vol. 3221, no. 1. AIP Publishing, 2024. https://doi.org/10.1063/5.0235906 .
25	Dhamotharan, S., K. Pradeep, K. Saravana Prasanth, M. Kaviyarasu, M. Gokul, A. Felix Sahayaraj, M. Selvan, and S. Ganesh Kumar. "Progress in Self-Healing Polymer Composites: Materials Design, Mechanisms, and Applications." In AIP Conference Proceedings, vol. 3221, no. 1. AIP Publishing, 2024. https://doi.org/10.1063/5.0235905 .
26	Rani, Ganesan Elizabeth, Marimuthu Sakthimohan, Arockiasamy Felix Sahayaraj, and Mariappan Sornalakshmi. "Quantitative Automated Detection of Voids, Pores, Cracks, and Fibre Orientation in Scanning Electron Microscopy Images Utilising Mask Convolutional Neural Networks (M-CNN) for Natural Fibre Composite Characterisation." Transactions of FAMENA 48, no. 4 (2024): 45-64. https://doi.org/10.21278/TOF.484060123 .
27	Kumar, S. Ganesh, R. Mohamed Rizwan, V. Naveen Kumar, B. Revathi, S. M. Rahul, Indran Suyambulinagm, and Felix Sahayaraj Arockiasamy. "A Review on Advancements in Polymer Composites for 3D Printing: Materials, Processes, and Applications." In International Conference on Eco-Friendly Fibers and Polymeric Materials, pp. 613-622. Singapore: Springer Nature Singapore, 2024. https://doi.org/10.1016/j.matt.2021.10.018 .
28	Ganeshkumar, S., S. Barath Kumar, K. Madhan Kumar, D. Hariharan, Indran Suyambulinagm, and Felix Sahayaraj Arockiasamy. "Mechanical Performance and Sustainability of Polymer Composites—A Critical Review." In International Conference on Eco-Friendly Fibers and Polymeric Materials, pp. 623-635. Singapore: Springer Nature Singapore, 2024. https://doi.org/10.1007/978-981-97-7071-7_44 .
29	Gopi, R. R., and Ebenezer Thaninayagam. "Synthesis and Investigation of Charge Storage Characteristics in Ni-MOF/PANI Composite as an Active Electrode Material for Supercapacitor." Electrochimica Acta (2024): 145130. https://doi.org/10.1016/j.electacta.2024.145130 .

2023

S.No.	Publications
1	Jenish Iyyadurai, Felix Sahayaraj Arockiasamy, Tamilselvan Manickam, Srinivasan Rajaram, Indran Suyambulingam, Suchart Siengchin. “Experimental Investigation on Mechanical, Thermal, Viscoelastic, Water Absorption, and Biodegradability Behavior of Sansevieria Ehrenbergii Fiber Reinforced Novel Polymeric Composite with the Addition of Coconut Shell Ash Powder.” Journal of Inorganic and Organometallic Polymers and Materials (2023). DOI: 10.1007/s10904-023-02537-8.
2	Tamilselvan Manickam, Jenish Iyyadurai, Maniraj Jaganathan, Ashokkumar Babuchellam, Muthukrishnan Mayakrishnan, Felix Sahayaraj Arockiasamy. “Effect of Stacking Sequence on Mechanical, Water Absorption, and Biodegradable Properties of Novel Hybrid Composites for Structural Applications.” International Polymer Processing (2023). DOI: 10.1515/ipp-2022-4274.
3	Sathish, J Maniraj, VS Thangarasu. “Study of Friction, Wear and Plastic Deformation of Automotive Brake Disc Subjected to Thermo-Mechanical Fatigue.” Matéria (Rio de Janeiro) (2023). DOI: 10.1590/1517-7076-RMAT-2022-0329.
4	A. Felix Sahayaraj. “Revolutionizing Energy Storage: The Rise of Silicon-Based Solutions.” Silicon (2023). DOI: 10.1007/s12633-023-02417-3.
5	Felix Sahayaraj A, Muthukrishnan M, Jenish I. “Extraction and Characterization of Sponge Gourd Outer Skin Fiber.” Journal of Natural Fiber (2023). DOI: 10.1080/15440478.2023.2208888.
6	A. Felix Sahayaraj, H Joy Prabu, J Maniraj, M Kannan, M Bharathi, P Diwahar, J Salamon. “Metal–Organic Frameworks (MOFs): The Next Generation of Materials for Catalysis, Gas Storage, and Separation.” Journal of Inorganic and Organometallic Polymers and Materials (2023). DOI: 10.1007/s10904-023-02657-1.
7	Jenish Iyyadurai, Felix Sahayaraj Arockiasamy, Tamil Selvan Manickam, Indran Suyambulingam, Suchart Siengchin, M Appadurai, E Raj. “Revolutionizing Polymer Composites: Boosting Mechanical Strength, Thermal Stability, Water Resistance, and Sound Absorption of Cissus Quadrangularis Stem Fibers with Nano Silica.” Silicon (2023). DOI: 10.1007/s12633-023-02510-7.
8	Vijayakumar Mani, Kumaresan Krishnaswamy, Felix Sahayaraj Arockiasamy, Tamil Selvan Manickam. “Mechanical and Dielectric Properties of Cissus Quadrangularis Fiber-Reinforced Epoxy/TiB2 Hybrid Composites.” International Polymer Processing (2023). DOI: 10.1515/ipp-2022-4321.
9	Diwahar Periyasamy, Bharathi Manoharan, Felix Sahayaraj Arockiasamy, D Aravind, K Senthilkumar, N Rajini, Faruq Mohammad, Hamad A Al-Lohedan. “Exploring the Recycling Potential of HDPE Films Reinforced with Flax Fiber for Making Sustainable Decorative Tiles.” Journal of Materials Research and Technology (2023). DOI: 10.1016/j.jmrt.2023.06.067.
10	R Prem Kumar, A Felix Sahayaraj, M Muthukrishnan. “Effect of Hybridization on Natural Fiber Reinforced Polymer Composite Materials – A Review.” Polymer Composites (2023). DOI: 10.1002/pc.27489.
11	SRG Krishnan, P Muthiah, M Jaganathan. “Optimization of Boriding Process on AISI 1015 Steel Using Response Surface Methodology.” Matéria (Rio de Janeiro) (2023). DOI: 10.1590/1517-7076-RMAT-2023-0086.
12	L. Rajeshkumar, M. Ramesh, V. Bhuvaneswari, D. Balaji. “Carbon Nano Materials (CNMs) Derived from Biomass for Energy Storage Applications: A Review.” Carbon Letters (2023). DOI: 10.1007/s42823-023-00478.
13	B. Deeban, J. Maniraj, M. Ramesh. “Experimental Investigation of Properties and Aging Behavior of Pineapple and Sisal Leaf Hybrid Fiber-Reinforced Polymer Composites.” e-Polymers (2023). DOI: 10.1515/epoly-2022-8104.
14	B. Babu, S. Jeyakumar, S. Dhamotharan, P. Ramachandran. “Overview of Lean and Green Manufacturing System.” European Chemical Bulletin (2023). DOI: 10.31838/ecb/2023.12.6.49.
15	M. Ramesh, N. Vigneshwari, L. Rajeshkumar. “Cellulose Nanocrystals for Drug Delivery Applications.” Green Sustainable Process for Chemical and Environmental Engineering and Science (2023). DOI: B9780323951715000121.
16	M. Ramesh. “Mechanical, Wear, and Hydrophobic Properties of Silane-Treated Corn Husk Fibre and Betel Nut Epoxy Composites.” Biomass Conversion and Biorefinery (2023). DOI: 10.1007/s13399-023-04181-1.
17	A. Felix Sahayaraj. “Revolutionizing Energy Storage: The Rise of Silicon-Based Solutions.” Silicon (2023). DOI: 10.1007/s12633-023-02417-3.
18	Poulraj Prabhu. “Mechanical Properties, DMA and Structural Analysis of Cassia Auriculata/PLA Blended Hybrid Bio Matrix Composite.” Materiale Plastice (2023). DOI: 10.37358/MP.23.4.5689.
19	Felix Sahayaraj A. “Extraction and Characterization of Sponge Gourd Outer Skin Fiber.” Journal of Natural Fiber (2023). DOI: 10.1080/15440478.2023.2208888.
20	A. Felix Sahayaraj, J Maniraj, M Kannan, M Bharathi. “Metal–Organic Frameworks (MOFs): The Next Generation of Materials for Catalysis, Gas Storage, and Separation.” Journal of Inorganic and Organometallic Polymers and Materials (2023). DOI: 10.1007/s10904-023-02657-1.
21	Felix Sahayaraj. “Revolutionizing Polymer Composites: Boosting Mechanical Strength, Thermal Stability, Water Resistance, and Sound Absorption of Cissus Quadrangularis Stem Fibers with Nano Silica.” Silicon (2023). DOI: 10.1007/s12633-023-02510-7.
22	J. Maniraj. “Experimental Investigation and Machinability Behavior on Synthesized Titanium Composite.” Journal of Ceramic Processing Research (2023). DOI: 10.36410/jcpr.2023.24.3.453.
23	M. Ramesh. “Carbon and Cellulose-Based Nanoparticle-Reinforced Polymer Nanocomposites: A Critical Review.” Nanomaterials (2023). DOI: 10.3390/nano13111803.
24	Maniraj. “Optimization of Boriding Process on AISI 1015 Steel Using Response Surface Methodology.” Matéria (Rio de Janeiro) (2023). DOI: 10.1590/1517-7076-RMAT-2023-0086.
25	R Prem Kumar, A Felix Sahayaraj. “Effect of Hybridization on Natural Fiber Reinforced Polymer Composite Materials – A Review.” Polymer Composites (2023). DOI: 10.1002/pc.27489.
26	A Felix Sahayaraj, M Ramesh. “Extraction and Characterization of Novel Cellulosic Fiber from Jatropha Integerrima Plant Stem for Potential Reinforcement in Polymer Composites.” Biomass Conversion and Biorefinery (2023). DOI: 10.1007/s13399-023-04541-x.
27	Maniraj J. “Exploring the Potential of Nano Technology: A Review of Nano-Scale Multi-Layered-Composite Coatings for Cutting Tool Performance.” Arabian Journal of Chemistry (2023). DOI: 10.1016/j.arabjc.2023.105173.
28	A. Felix Sahayaraj. “Effect of cellulose nanofibers from red coconut peduncle waste as a reinforcement in epoxy composite sheets.” Cellulose Chemistry and Technology (2023). DOI: 10.35812/CelluloseChemTechnol.2023.57.75.
29	C. Ramesh. “Enhanced honey badger optimization of performance analysis of evacuated tube heat pipe solar collector integrated with PCM storage unit.” Energy & Environment (2023). DOI: 10.1177/0958305X231189187.
30	A. Felix Sahayaraj. “Solar Assisted Removal of Methylene Blue Dye from Wastewater Using Zinc-Metal Organic Framework (Zn-MOF).” Journal of Inorganic and Organometallic Polymers and Materials (2023). DOI: 10.1007/s10904-023-02823-5.
31	M. Ramesh. “Assessment of biodegradation of lignocellulosic fiber-based composites – A systematic review.” International Journal of Biological Macromolecules (2023). DOI: 10.1016/j.ijbiomac.2023.127237.
32	A. Felix Sahayaraj. “A Comprehensive Review of Real-time Monitoring and Predictive Maintenance Techniques: Revolutionizing Natural Fibre Composite Materials Maintenance with IoT.” Pertanika Journal of Science and Technology (2023). DOI: 10.47836/pjst.31.S1.05.
33	A. Felix Sahayaraj. “Tribological characterization of sponge gourd outer skin fiber-reinforced epoxy composite with Tamarindus indica seed filler addition using the Box–Behnken method.” e-Polymers (2023). DOI: 10.1515/epoly-2023-0052.
34	A. Felix Sahayaraj, M. Ramesh. “Characterization of Plumeria pudica bark fiber for reinforcing lightweight polymer composites and evaluating its physical, chemical, and thermal properties.” Biomass Conversion and Biorefinery (2023). DOI: 10.1007/s13399-023-05172-y.
35	M. Ramesh, C. Deepa. “Processing and properties of jute (Corchorus olitorius L.) fibres and their sustainable composite materials: A review.” Journal of Materials Chemistry A (2023). DOI: 10.1039/D3TA05481K.
36	V. Suresh. “Analysis of sustainable groundwater management policies for urban development.” Environmental Quality Management (2023). DOI: 10.1002/tqem.22090.
37	J. Maniraj, A. Felix Sahayaraj, C. Ram Kumar. “Machine Learning Techniques for the design and optimization of polymer composites: A review.” E3S Web of Conferences (2023). DOI: 10.1051/e3sconf/202342802013.
38	A. Felix Sahayaraj, S. Dhamotharan, D. Sandeep, P. Ramachandran. “Sustainable smart polymer composite materials: A comprehensive review.” E3S Web of Conferences (2023). DOI: 10.1051/e3sconf/202342802014.
39	A. Felix Sahayaraj. “Green synthesis of Silver/Iron (Ag/Fe) and copper/iron (Cu/Fe) nanoparticles for Cytotoxic Investigation on Henrietta Lacks (HeLa) Cancer Cell.” Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (2023). DOI: 10.1007/978-981-99-5567-1_7.
40	V. Suresh. “Microstructure, Worn Surface, Wear Assessment and Taguchi’s Approach of Titanium Alloy Hybrid Metal Matrix Composites for Automotive Applications.” SAE International (2023). DOI: 10.4271/2023-01-5103.
41	M. Ramesh. “Characterization of the Metal-Organic Framework Nanofibers Prepared via Electrospinning.” In Electrospun Nanofibres: Materials, Methods, and Applications (2023). DOI: 10.1201/9781003333814-1.
42	M. Ramesh, N. Vigneshwari. “Development and Characterization of the Cyclodextrin Nanofibers.” In Electrospun Nanofibres: Materials, Methods, and Applications (2023). DOI: 10.1201/9781003333814-6.
43	M. Ramesh, T. Vinitha. “Wear performance of the biocomposites in automotive applications.” In Biocomposites for industrial applications: Construction, biomedical, transportation and food packaging (2023). DOI: 10.1016/B978-0323918664000147.
44	M. Ramesh, A. Felix Sahayaraj. “Grass Fiber-Based Epoxy Composites.” In Epoxy-Based Biocomposites (2023). DOI: 10.1201/9781003271017-5.
45	M. Ramesh. “Frequency Bands Metamaterials.” In Electromagnetic Metamaterials: Properties and Applications (2023). DOI: 10.1002/9781394167074.ch7.
46	M. Ramesh, T. Vinitha, M. Tamil Selvan. “Tribological Characterization of Biocomposites: An Overview.” In Tribological Properties, Performance and Applications of Biocomposites (2023). DOI: 10.1002/9783527838080.ch1.
47	M. Ramesh. “Wear and Friction Behavior of Biocomposites Fabricated Through Additive Manufacturing.” In Tribological Properties, Performance and Applications of Biocomposites (2023). DOI: 10.1002/9783527838080.ch13.
48	M. Ramesh. “Jute Fibre-Reinforced Polyester Composites.” In Polyester-Based Biocomposites (2023). DOI: 10.1201/9781003270980-3.
49	M. Ramesh. “Fatigue Behavior of Natural Fiber-Based Epoxy Composites.” In Epoxy-Based Biocomposites (2023). DOI: 10.1201/9781003271017.
50	M. Ramesh. “Bast Fiber-Based Epoxy Composites.” In Epoxy-Based Biocomposites (2023). DOI: 10.1201/9781003271017.
51	M. Ramesh. “Introduction to Natural Materials for Food Packaging.” In Natural Materials for Food Packaging Application (2023). DOI: 10.1002/9783527837304.ch1.
52	M. Ramesh, P. Rama Chandran, P. Hariprasad, A. Arunkumar, C. Ram Kumar, R. Prem Kumar. “An experimental investigation on the effect of lithium and alkali resistant glass fiber on aluminum AA5383 fabricated by the stir-casting process.” Materials Today (2023). DOI: 10.1016/j.matpr.2023.05.152.
53	M. Ramesh, N. Vigneshwari. “Cellulose nanocrystals for drug delivery applications.” In Green Sustainable Process for Chemical and Environmental Engineering and Science, 2023. https://doi.org/10.1016/B978-0-323-95171-5.00012-1.
54	Yogendra Sharma, Mohit Gupta, Mr. Arivumani Ravanan, Isha Mehra, Lavish Kumar Singh, Monu Kumar, Sandeep Kumar Duran, and Utkarsh Patel. “Groundwater Modelling of Jamwa Ramgarh using Visual MODFlow Flex.” Earth and Environmental Science, 2023. https://doi.org/10.1088/1755-1315/1327/1/012029.

2022

S.No.	Publications
1	I. Jenish, A. Felix Sahayaraj, V. Suresh, J. Maniraj, M. Appadurai, E. Fantin Irudaya Raj, Omaima Nasif, Saleh Alfarraj, Ashok Kumar Kumaravel. “Analysis of the hybrid of mudar/snake grass fiber-reinforced epoxy with nano-silica filler composite for structural application.” Advances in Materials Science and Engineering (2022). DOI: 10.1155/2022/7805146.
2	B. Ashok Kumar, M. Muthu Krishnan, A. Felix Sahayaraj, Mohamad Reda A. Refaai, G. Yuvaraj, D. Madhesh, Haiter Lenin Allasi. “Characterization of the aluminium matrix composite reinforced with silicon nitride (AA6061/Si3N4) synthesized by the stir casting route.” Advances in Materials Science and Engineering (2022). DOI: 10.1155/2022/8761865.
3	A. Felix Sahayaraj, M. Muthukrishnan, M. Ramesh. “Experimental investigation on physical, mechanical, and thermal properties of jute and hemp fibers reinforced hybrid polylactic acid composites.” Polymer Composites (2022). DOI: 10.1002/pc.26581.
4	A. Felix Sahayaraj, M. Muthukrishnan. “Experimental investigation on the effect of fiber volume fraction of sponge gourd outer skin fiber reinforced epoxy composites.” Polymer Composites (2022). DOI: 10.1002/pc.26754.
5	Iyyadurai Jenish, A. Felix Sahayaraj, M. Appadurai, E. Fantin Irudaya Raj, P. Suresh. “Sea Sand Abrasive Wear of Red Mud Micro Particle Reinforced Cissus quadrangularis Stem fiber/epoxy Composite.” Journal of Natural Fibers (2022). DOI: 10.1080/15440478.2022.2087131.
6	Arivumani Ravanan, Ilamathi Palanivel, Balamurugan Kulendran. “Microstructure, Tensile, and Fractography Analysis of Al2016 and Al2618 Age Hardened Aluminium Alloys.” Chiang Mai Journal of Science (2022). DOI: 10.12982/CMJS.2022.066.
7	P. Hariprasad, M. Kannan, C. Ramesh, A. Felix Sahayaraj, I. Jenish, Fayaz Hussain, Nidhal Ben Khedher, Attia Boudjemline, V. Suresh. “Mechanical and morphological studies of Sansevieria trifasciata fiber-reinforced polyester composites with the addition of SiO2 and B4C.” Advances in Materials Science and Engineering (2022). DOI: 10.1155/2022/1634670.
8	R. Premkumar, K. Sathish Kumar, J. Maniraj, A. Felix Sahayaraj, I. Jenish, Fayaz Hussain, Nidhal Ben Khedher, Walid Aich, V. Suresh. “Experimental studies on mechanical and thermal properties of polyester hybrid composites reinforced with Sansevieria trifasciata fibers.” Advances in Materials Science and Engineering (2022). DOI: 10.1155/2022/8604234.
9	C. Ramesh, M. Vijayakumar, S. Alshahrani, G. Navaneethakrishnan, R. Palanisamy, L. Natrayan, C. Ahamed Saleel, A. Afzal, S. Shaik, H. Panchal. “Performance enhancement of selective layer coated on solar absorber panel with reflector for water heater by response surface method: A case study.” Case Studies in Thermal Engineering (2022). DOI: 10.1016/j.csite.2022.102093.
10	A. Felix Sahayaraj, M. Muthukrishnan, M. Ramesh. “Influence of Tamarindus indica seed nano‐powder on properties of Luffa cylindrica (L.) fruit waste fiber reinforced polymer composites.” Polymer Composites (2022). DOI: 10.1002/pc.26957.
11	R. Prem Kumar, A. Felix Sahayaraj, M. Muthukrishnan. “Experimental investigation on jute/snake grass/kenaf fiber reinforced novel hybrid composites with Annona reticulata seed filler addition.” Materials Research Express (2022). DOI: 10.1088/2053-1591/ac92ca.
12	M. Muthukrishnan, B. Ashok Kumar, A. Felix Sahayaraj, I. Jenish, M. Tamilselvan. “Mechanical and morphological characterization of sisal/kenaf/pineapple mat reinforced hybrid composites.” International Polymer Processing (2022). DOI: 10.1515/ipp-2022-4238.
13	P. Hariprasad, K. Kumaresan, M. Vijayakumar, G. Kumaresan. “Surface and Wear Investigation on Microwave Sintered Nitinol Composite.” Materials Research (2022). DOI: 10.1590/1980-5373-MR-2022-0365.
14	Ravichandran Saravanan, Rajenthirakumar Duraiswamy, Felix Sahayaraj Arockiasamy. “Tool and formability multi-response optimization for ultimate strength and ductility of AA8011 during axial compression.” Advances in Mechanical Engineering (2022). DOI: 10.1177/16878132221131731.
15	G. D. Wenish, M. Prince, J. Maniraj. “Characterization of induction hardened and tempered AISI 1045 steel.” Matéria (Rio de Janeiro) (2022). DOI: 10.1590/1517-7076-RMAT-2022-0170.
16	A. Felix Sahayaraj, J. Venkatesh, R. Raghu, R. Senthil Kumar, E. Manikandan, Ram Subbiah. “Analysis of formability and optimization on nickel coated stainless steel sheet.” Materials Today (2022). DOI: 10.1016/j.matpr.2021.01.625.
17	R. Prem Kumar, L. Girisha, T. Pravinprabu, A. Felix Sahayaraj, S. N. Santhosh Kumar, Ram Subbiah. “Analysis of abrasive wear resistance on scandium composite.” Materials Today: Proceedings (2022). DOI: 10.1016/j.matpr.2021.01.203.
18	Kedri Janardhana, Sivakumar A, Suresh R, Ramesh C, Syed Musthafa A, Satyendra Vishwakarma. “Analyzing thermal performance of a solar PV using a nanofluid.” Materials Today (2022). DOI: 10.1016/j.matpr.2022.08.177.
19	Kedri Janardhana, Sivakumar A, Jerome Nithin Gladson G, Ramesh C, Syed Musthafa A, Gopinathan R. “Study on the performance of a flat plate solar water heater using a hybrid nanofluid.” Materials Today (2022). DOI: 10.1016/j.matpr.2022.08.181.
20	Vijayakumar M, Shanawaz A M, Prabhu N, Arunprasath K, Ramesh C, Midhun Mohan. “The influence of cryogenic treatment on titanium alloys mechanical properties.” Materials Today (2022). DOI: 10.1016/j.matpr.2022.04.513.
21	Vijayakumar M, Mariselvan P, Muthukrishnan M, Mohemed Sharifkhan P, Ramesh C. “Mechanical properties of deep cryogenic treated Ni–Al–B alloy fabricated by CMT process.” Materials Today (2022). DOI: 10.1016/j.matpr.2022.04.019.
22	Manikandan V, Mariselvam K, Nekin Joshua R, Ramesh C, Arunprasath K. “Study on process parameters of Tungsten Inert gas welded aluminium alloy 5086 through mechanical characteristics.” Materials Today (2022). DOI: 10.1016/j.matpr.2022.03.641.
23	M. Ramesh, L. Rajeshkumar, D. Balaji, V. Bhuvaneswari. “Influence of Moisture Absorption on Mechanical properties of Biocomposites reinforced Surface Modified Natural Fibers.” In Aging Effects on Natural Fiber-Reinforced Polymer Composites (2022). DOI: 10.1007/978-981-16-8360-2_2.
24	M. Ramesh, M. Tamil Selvan, K. Niranjana. “Hygrothermal Aging, Kinetics of Moisture Absorption, Degradation Mechanism and Their Influence on Performance of the Natural Fibre Reinforced Composites.” In Aging Effects on Natural Fiber-Reinforced Polymer Composites (2022). DOI: 10.1007/978-981-16-8360-2_14.
25	M. Ramesh, M. Muthukrishnan. “Free Vibration and Damping Characterization of the Biocomposites.” In Vibration and Damping Behavior of Biocomposites (2022). DOI: 10.1201/9781003173625.
26	M. Ramesh, D. Balaji, L. Rajeshkumar, V. Bhuvaneswari. “Manufacturing methods of elastomer blends and composites.” In Elastomer Blends and Composites Principles, Characterization, Advances, and Applications (2022). DOI: 10.1016/B978-0-323-85832-8.00011-0.
27	M. Ramesh, M. Muthukrishnan. “Free Vibration and Damping Characterization of the Biocomposites.” In Vibration and Damping Behavior of Biocomposites (2022). DOI: 10.1201/9781003173625.
28	C. Deepa, M. Ramesh. “Banana fibers, their composites and applications.” In Plant Fibers, their Composites, and Applications (2022). DOI: 10.1016/B978-0-12-824528-6.00018-7.
29	M. Ramesh, R. Bhoopathi. “Hemp fibers, their composites and applications.” In Plant Fibers, their Composites, and Applications (2022). DOI: 10.1016/B978-0-12-824528-6.00013-8.
30	M. Ramesh, J. Maniraj, S. Ganesh Kumar. “Polysaccharide-Fibrous Clay Bionanocomposites and their Applications.” In Advanced Applications of Micro and Nano Clay Biopolymer-based Composites (2022). DOI: 10.21741/9781644901915-1.
31	M. Ramesh, C. Deepa. “Applications of green composites for sustainable development.” In Green Sustainable Process for Chemical and Environmental Engineering and Science (2022). DOI: 10.1016/B978-0-323-99643-3.00005-X.
32	M. Ramesh, L. Rajeshkumar, D. Balaji, S. Sivalingam. “Mechanical and viscoelastic properties of wool composites.” In Wool Fiber Reinforced Polymer Composites (2022). DOI: 10.1016/B978-0-12-824056-4.00001-7.
33	M. Ramesh, M. Tamil Selvan, P. Hariprasad, D. Ashok Kumar. “Polypropylene/Clay Nanocomposites.” In Advance Applications of Micro and Nano Clay: Synthetic Polymer Composites (2022). DOI: 10.21741/9781644902035-9.
34	M. Ramesh, V. Bhuvaneswari, D. Balaji, L. Rajeshkumar. “Self‐Healable Conductive and Polymeric Composite Materials.” In Aerospace Polymeric Materials (2022). DOI: 10.1002/9781119905264.ch10.
35	M. Ramesh, M. Muthukrishnan. “Piezoelectric Composites and their Applications.” In Advanced Functional Piezoelectric Materials and Applications (2022). DOI: 10.1007/978-981-15-1654-4_2.
36	M. Ramesh, J. Maniraj, S. Ganesh Kumar, A. Felix Sahayaraj. “Physical Modification of Bast Fibre Surface and Their Effects.” In Bast Fibers and Their Composites: Processing, Properties and Applications (2022). DOI: 10.1007/978-981-19-4866-4_4.
37	C. Deepa, D. Balaji, V. Bhuvaneswari, L. Rajeshkumar, M. Ramesh, M. Priyadharshini. “Deep Learning for the Selection of Multiple Analogs.” In Drug Design Using Machine Learning (2022). DOI: 10.1002/9781394167258.ch4.
38	M. Ramesh, L. Rajeshkumar, D. Balaji, V. Bhuvaneswari. “Polymer composites for enzyme sensors.” In Polymeric Nanocomposite Materials for Sensor Applications (2022). DOI: 10.1016/B978-0-323-98830-8.00019-9.
39	M. Ramesh, D. Balaji, L. Rajeshkumar, S. Sivalingam. “Aerogels of sodium alginate and their behavior toward wastewater treatment.” In Sodium alginate-based nanomaterials for wastewater treatment (2022). DOI: 10.1016/B978-0-12-823551-5.00002-1.
40	M. Ramesh, J. Maniraj, L. Rajeshkumar. “Thermomechanical characterization of cellulose fiber composites.” In Cellulose fiber reinforced composites: Interface Engineering, processing and performance (2022). DOI: 10.1016/B978-0-323-90125-3.00014-8.
41	M. Ramesh, N. Vigneshwari, L. Rajeshkumar. “Cellulose nanocrystals for drug delivery applications.” In Green Sustainable Process for Chemical and Environmental Engineering and Science (2022). DOI: 10.1016/B978-0-323-95171-5.00012-1.

2021

S.No.	Publications
1	M. Ramesh, K. Niranjana. “Effect of Process Parameters on Fused Filament Fabrication Printed Composite Materials.” High-Performance Composite Structures, (2021). https://doi.org/10.1007/s41365-020-00772-2
2	Chinnaiyan Deepa, Lakshminarasimhan Rajeshkumar, Manickam Ramesh. “Thermal Properties of Kenaf Fiber-Based Hybrid Composites.” Natural Fibre Reinforced Composites: Thermal Properties and Applications, (2021). https://doi.org/10.1007/978-3-030-38909-1_13
3	M. Ramesh, J. Maniraj, S. Ramesh. “Thermal Properties of the Grass/Cane Fiber-Based Hybrid Composites.” Natural Fiber-Reinforced Composites: Thermal Properties and Applications, (2021). https://doi.org/10.1007/978-981-15-0951-4_2
4	C. Thirumarai Selvi, R. S. Sankarasubramanian, M. MuthuKrishnan. “Encryption and Decryption of Image for Secured Data Transmission.” Futuristic Communication and Network Technologies, (2021). https://doi.org/10.1007/978-3-030-01152-8_6
5	C. Thirumarai Selvi, R. S. Sankarasubramanian, M. MuthuKrishnan. “Detection and Diagnosis of Fault Using Light-Weighted Midori Blocks.” Futuristic Communication and Network Technologies, (2021). https://doi.org/10.1007/978-981-15-6898-1_19
6	M. Ramesh, L. R. Kumar, D. Balaji, V. Bhuvaneswari. “Green Composite Using Agricultural Waste Reinforcement.” Green Composites, (2021). https://doi.org/10.1007/978-981-15-9643-8_2
7	M. Ramesh, C. Deepa. “Metal-Organic Frameworks and Their Composites.” Metal-Organic Frameworks for Chemical Reactions, (2021). https://doi.org/10.1016/B978-0-12-822099-3.00001-0
8	M. Ramesh, N. Kuppuswamy, S. Praveen. “Metal-Organic Framework for Batteries and Supercapacitors.” Metal-Organic Frameworks for Chemical Reactions, (2021). https://doi.org/10.1016/B978-0-12-822099-3.00002-2
9	M. Ramesh, M. Muthukrishnan, Anish Khan. “Metal-Organic Frameworks and Permeable Natural Polymers for Reasonable Carbon Dioxide Fixation.” Metal-Organic Frameworks for Chemical Reactions, (2021). https://doi.org/10.1016/B978-0-12-822099-3.00017-4
10	M. Ramesh, J. Maniraj, L. R. Kumar. “Biocomposites for Energy Storage.” Bio-Based Composites: Processing, Characterization, Properties, and Applications, (2021). http://doi.org/10.1002/9781119641803.ch9
11	M. Ramesh, L. Rajeshkumar. “Technological Advances in Analyzing of Soil Chemistry.” Applied Soil Chemistry, (2021). https://doi.org/10.1002/9781119711520.ch4
12	M. Ramesh, C. Deepa. “Mechanical Properties of Natural and Synthetic Fiber Reinforced Hybrid Composites.” Hybrid Natural Fiber Composites: Formulations, Processing, Characterization, Properties, and Engineering Applications, (2021). https://doi.org/10.1016/B978-0-12-819900-8.00013-1
13	M. Ramesh, L. Rajeshkumar, D. Balaji. “Aerogels for Insulation Applications.” Aerogels for Insulation Applications, (2021). https://doi.org/10.1007/978-3-030-57567-3_2
14	Triveni Rajashekhar Mandlimath, Sathasivam Pratheep Kumar, M. Ramesh. “Introduction and Scope of Geochemistry.” Geochemistry: Concepts and Applications, (2021). https://doi.org/10.1007/978-981-13-6048-3_16
15	Sathasivam Pratheep Kumar, Triveni Rajashekhar Mandlimath, M. Ramesh. “Inorganic Geochemistry.” Geochemistry: Concepts and Applications, (2021). https://doi.org/10.1007/978-3-030-45176-8_1
16	Manickam Ramesh, Lakshminarashimhan Rajeshkumar, Devarajan Balaji. “Mechanical and Dynamic Properties of Ramie Fiber-Reinforced Composites.” Mechanical and Dynamic Properties of Biocomposites, (2021). https://doi.org/10.1007/978-3-030-36320-1_1
17	M. Ramesh, L. Rajeshkumar, R. Saravanakumar. “Mechanically-Induced Self-Healable Materials.” Self-Healing Smart Materials and Allied Applications, (2021). https://doi.org/10.1007/978-3-030-41541-3_2
18	M. Ramesh, L. Rajeshkumar, D. Balaji, V. Bhuvaneswari, S. Sivalingam. “Self-Healable Conductive Materials.” Self-Healing Smart Materials and Allied Applications, (2021). https://doi.org/10.1002/9781119090040.ch24
19	M. Ramesh, L. Rajeshkumar. “Case-Studies on Green Corrosion Inhibitors.” Sustainable Corrosion Inhibitors, (2021). https://doi.org/10.1007/978-3-030-59303-4_12
20	M. Ramesh, K. Sakthishobana. “Significance of Biosurfactants in Oil Recovery and Bioremediation of Crude Oil.” Green Sustainable Process for Chemical and Environmental Engineering and Science, (2021). https://doi.org/10.1007/978-3-030-45874-2_7
21	M. Ramesh, C. Deepa. “Biocomposites for Biomedical Devices.” Green Biocomposites for Biomedical Engineering, (2021). https://doi.org/10.1007/978-3-030-03763-5
22	C. Deepa, M. Ramesh. “Biocomposites for Prosthesis.” Green Biocomposites for Biomedical Engineering, (2021). https://doi.org/10.1007/978-3-319-96727-1_3
23	M. Ramesh, S. Abinaya, Anish Khan, Abdullah M. Asiri. “Current and Future Trends in Food Waste Valorization for the Production of Chemicals, Materials, and Fuels by Advanced Technology to Convert Food Wastes into Fuels and Chemicals.” Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Biological Processes, (2021). https://doi.org/10.1016/B978-0-12-823139-5.00012-5
24	M. Ramesh, K. Adithya, C. M. Jagadesh Kumar, C. G. Mohan, Jayant Nalawade, R. Prakash. “Thermochemical Conversion Methods of Bio-Derived Lignocellulosic Waste Molecules into Renewable Fuels.” Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Biological Processes, (2021). https://doi.org/10.1016/B978-0-12-817920-7.00002-1
25	M. Ramesh, S. Praveen, N. Kuppuswamy, Anish Khan, Abdullah M. Asiri. “Biodiesel Production from Waste Cooking Oil Using Ionic Liquids as Catalyst.” Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Biological Processes, (2021). https://doi.org/10.1007/978-981-15-6855-7_1
26	M. Ramesh, D. Balaji, L. Rajeshkumar, V. Bhuvaneswari, R. Saravanakumar, Anish Khan, Abdullah M. Asiri. “Tribological Behavior of Glass/Sisal Fiber Reinforced Polyester Composites.” Vegetable Fiber Composites and Their Technological Applications, (2021). https://doi.org/10.1007/978-981-15-6126-2_21
27	M. Ramesh, L. Rajeshkumar, D. Balaji, M. Priyadharshini. “Properties and Characterization Techniques for Waterborne Polyurethanes.” Sustainable Production and Applications of Waterborne Polyurethanes, (2021). https://doi.org/10.1007/978-3-030-27001-6_1
28	M. Ramesh, Sanjay Mavinkere Rangappa, Jyotishkumar Parameswaranpillai, Suchart Siengchin. “Introduction to Biodegradable Polymers.” Biodegradable Polymers, Blends and Composites, (2021). https://doi.org/10.1007/978-981-13-1720-4_1
29	M. Ramesh, M. Muthukrishnan. “Biodegradable Polymer Blends and Composites for Food-Packaging Applications.” Biodegradable Polymers, Blends and Composites, (2021). https://doi.org/10.1002/9781119489274.ch2
30	M. Ramesh, L. Rajeshkumar, D. Balaji, V. Bhuvaneswari. “Keratin-Based Biofibers and Their Composites.” Advances in Bio-Based Fiber: Moving Towards a Green Society, (2021). https://doi.org/10.1007/978-981-15-7914-6_10
31	M. Ramesh, L. Rajesh Kumar, C. Deepa, M. Tamil Selvan, Vinod Kushvaha, Mochamad Asrofi. “Impact of Silane Treatment on Characterization of Ipomoea Staphylina Plant Fiber Reinforced Epoxy Composites.” Journal of Natural Fibers, (2021). https://doi.org/10.1080/15440478.2021.19
32	L. Rajeshkumar, A. Felix Sahayaraj, M. Muthukrishnan, M. Ramesh. “Effect of Hybridization on Properties of Tamarind (Tamarindus indica L.) Seed Nano-Powder Incorporated Jute-Hemp Fibers Reinforced Epoxy Composites.” Polymer Composites, (2021). https://doi.org/10.1002/pc.26326
33	I. Jenish, A. Felix Sahayaraj, M. Appadurai, E. Fantin Irfan, M. Ramesh. “Tensile and Flexural Properties of Natural Fiber Reinforced Composite Materials.” Journal of Composites, (2021). https://doi.org/10.1002/cem.2826
34	V. Bhuvaneswari, M. Priyadharshini, C. Deepa, D. Balaji, L. Rajeshkumar, M. Ramesh. “Deep Learning for Material Synthesis and Manufacturing Systems: A Review.” Materials Today (2021). https://doi.org/10.1016/j.matpr.2020.11.351
35	M. Ramesh, C. Deepa, M. Tamil Selvan, L. Rajeshkumar, D. Balaji, V. Bhuvaneswari. “Mechanical and Water Absorption Properties of Calotropis gigantea Plant Fibers Reinforced Polymer Composites.” Materials Today (2021). https://doi.org/10.1016/j.matpr.2020.11.480
36	C. Thirumarai Selvi, R. S. Sankarasubramanian, M. MuthuKrishnan. “Encryption and Decryption of Image for Secured Data Transmission.” Futuristic Communication and Network Technologies, Lecture Notes in Electrical Engineering, (2021). https://www.springerprofessional.de/encryption-and-decryption-of-image-for-secured-data-transmission/19748816
37	C. Thirumarai Selvi, R. S. Sankarasubramanian, M. MuthuKrishnan. “Detection and Diagnosis of Fault Using Light-Weighted Midori Blocks.” Futuristic Communication and Network Technologies, Lecture Notes in Electrical Engineering, (2021). https://doi.org/10.1007/978-981-16-4625-6_16
38	A. Felix Sahayaraj, M. Muthukrishnan, R. Prem Kumar, M. Ramesh, M. Kannan. “PLA Based Bio Composite Reinforced with Natural Fibers - Review.” Materials Science and Engineering, (2021). https://doi.org/10.1080/15440478.2021.1902896
39	A. Saravanakumar, D. Ravikanth, L. Rajeshkumar, D. Balaji, M. Ramesh. “Tribological Behaviour of MoS2 and Graphite Reinforced Aluminium Matrix Composites.” Materials Science and Engineering, (2021). https://doi.org/10.1088/1757-899X/1059/1/012021
40	C. Deepa, M. Ramesh. “Biocomposites for Biomedical Devices.” Green Biocomposites for Biomedical Engineering, (2021). https://doi.org/10.1007/978-3-030-03763-5
41	M. Ramesh, L. Rajeshkumar. “Case Studies on Green Corrosion Inhibitors.” Sustainable Corrosion Inhibitors, (2021). https://doi.org/10.1007/978-3-030-59303-4_12
42	M. Ramesh, K. Sakthishobana. “Significance of Biosurfactants in Oil Recovery and Bioremediation of Crude Oil.” Green Sustainable Process for Chemical and Environmental Engineering and Science, (2021). https://doi.org/10.1007/978-3-030-45874-2_7
43	M. Ramesh, S. Praveen, N. Kuppuswamy, Anish Khan, Abdullah M. Asiri. “Biodiesel Production from Waste Cooking Oil Using Ionic Liquids as Catalyst.” Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Biological Processes, (2021). https://doi.org/10.1007/978-981-15-6855-7_1
44	M. Ramesh, D. Balaji, L. Rajeshkumar, V. Bhuvaneswari, R. Saravanakumar, Anish Khan, Abdullah M. Asiri. “Tribological Behavior of Glass/Sisal Fiber Reinforced Polyester Composites.” Vegetable Fiber Composites and Their Technological Applications, (2021). https://doi.org/10.1007/978-981-15-6126-2_21
45	M. Ramesh, L. Rajeshkumar, D. Balaji, M. Priyadharshini. “Properties and Characterization Techniques for Waterborne Polyurethanes.” Sustainable Production and Applications of Waterborne Polyurethanes, (2021). https://doi.org/10.1007/978-3-030-27001-6_1

Department of Science and Humanities

2025

1.Palanisamy Vignesh Kumar, Arumugam Basker, Umapathi Krishnamoorthy, Kamal Sharma, and Md Irfanul Haque Siddiqui, “Efficacy of Chitosan Based Activated Carbon for Mercury Removal from Wastewater through Adsorption Kinetic and Thermodynamic Studies for Environmental Sustainability,” International Journal of Chemical Reactor Engineering 23, no. 7 (2025): 835–51, https://doi.org/10.1515/ijcre-2024-0013.

2.Arumugam Basker, Thangavelu Thayumanavan, Velusamy Arul, Kothalam Radhakrishnan, J. Vinoth Kumar, E. Ragulkumar, and Mir Waqas Alam, “Optimization of Crystal Violet Adsorption Using Sulfuric Acid Activated Kamugu Nut Shell Carbon: A Factorial Design Approach,” Biomass Conversion and Biorefinery (2025): 1–17, https://doi.org/10.1007/s13399-024-06404-5.

3.Hariharan, G., M. Babu, S. Bharathi, K. Satheesh, and A. Arivarasan. 2025. “Fabrication and Its Electrochemical Investigation...” Ionics 31, no. 4 (April): 2105–2118. https://doi.org/10.1007/s11581-025-05782-y.

4.Gokila, V., S. Ayyappan, P. Muthukrishnan, T. Brindha, and J. J. David. 2025. “Strategic Bandgap Tuning of WO₃ Nanoparticles for Superior Visible-Light-Driven Photocatalytic Degradation for Water Purification: An Effect of Y³⁺ Doping.” Research on Chemical Intermediates 51, no. 3: 1009–1028. https://doi.org/10.1007/s11164-025-05428-8.

5.Balasubramanian, V., S. Kalpana, R. Jeyachitra, V. Vijayalakshmi, and T. S. Senthil. 2025. "Importance of Calcium Doping for the Enhanced Photocatalytic Performance of BiFeO₃ Nanoparticles in Visible Light." Physica Scripta. Published online ahead of print, 2025. https://doi.org/10.1088/[ARTICLE-ID].

6.Prakash, S., S. Ponnusamy, J. Rangaraman, and B. Thirumalairaj. 2025. “Sustainable Synthesis of Pt–ZnO Nanoparticles Encapsulated in Gum Acacia as a Facile Nanocatalyst for Nitroarene Hydrogenation.” Reaction Kinetics, Mechanisms and Catalysis. https://doi.org/10.1007/s11144-025-02678-6.

7.Babu, M., G. Hariharan, S. Bharathi, K. Satheesh, D. Dineshkumar, and A. Arivarasan. 2026. “Electrochemical Performances of Reduced Graphene Oxide Loaded Orthorhombic Nickel Vanadates for Supercapacitor Applications.” Journal of the Taiwan Institute of Chemical Engineers 148: 105803. https://doi.org/10.1016/j.jtice.2025.105803.

8.Marimuthu, G., K. Saravanakumar, K. Kavirasu, and R. Marnadu. 2025. “Optimization of High Performance Self-Powered SnO₂/p-Si UV Photodetectors...” Journal of Materials Science: Materials in Electronics 36, no. 15 (May): 12345. https://doi.org/10.1007/s10854-025-13467-x.

9.Vishnupriyan, T. “Predictive Analytics & Generative AI for Workforce Performance: Enhancing Productivity in the Post-Digital Era.” TPM – Testing, Psychometrics, Methodology in Applied Psychology 2 (2025). https://doi.org/[DOI].

2024

S.No.	Publications
1	Sivakumar, Dheenadhayalan, Ramasamy Rathinam, Thiagarajan Yamuna Rangaiya, Brindha Thirumalairaj, Umapathi Krishnamoorthy, and Md. Irfanul Haque Siddiqui. "Biosurfactants in Biocorrosion and Corrosion Mitigation of Metals: An Overview." Open Chemistry 22, no. 1 (2024): 20240036.https://doi.org/10.1515/chem-2024-0036.
2	Viswanathan, Gokila, Ayyappan Solaiappan, Brindha Thirumalairaj, Umapathi Krishnamoorthy, Natrayan Lakshmaiya, Md. Irfanul Haque Siddiqui, and Mohd Asif Shah. "Improved Photocatalytic Properties of WO₃ Nanoparticles for Malachite Green Dye Degradation Under Visible Light Irradiation: An Effect of La Doping." Open Chemistry 22, no. 1 (2024): 20240035.https://doi.org/10.1515/chem-2024-0035.
3	Subapriya, V., D. Karthickeyan, M. Saravanan, R. Janani, and K. Venkatachalam. "ZnMoO₄/g‐C₃N₄ S‐Scheme Heterojunction Photocatalyst: Synthesis, Structural, Optical, and Its Photocatalytic Properties." Journal of Materials Science: Materials in Electronics 35 (2024): 1437.https://doi.org/10.1007/s10854-024-13150-x.
4	Kalpanaa, S., C. R. Kalaiselvi, R. Jeyachitra, and T. S. Senthil. "Enhanced Photocatalytic Hydrogen Production of Ag and N-Doped NaTaO₃ Perovskite Nanocubes." Desalination and Water Treatment 319 (July 2024): 100448.https://doi.org/10.1016/j.dwt.2024.100448.
5	Ezhilarasi, S. B., R. Janani, K. Asokan, and Shubra Singh. "Synergistic Integration of Ternary Chalcogenide ZnIn₂S₄ and Brownmillerite Ca₂Fe₂O₅ for Efficient Degradation of Diverse Antibiotics: Facilitating Easy Retrieval with Dialysis Bag." Materials Research Bulletin 180 (2024): 113007.https://doi.org/10.1016/j.materresbull.2024.113007.
6	Viswanathan, Gokila, Ayyappan S., Brindha Thirumalairaj, and Umapathi Krishnamoorthy. "Tailoring Photocatalytic Performance: Lanthanum Doping in Nickel Oxide for Efficient Degradation of Some Industrial Cationic Dyes in Visible Light Radiation." Desalination and Water Treatment 320 (2024): 100731.https://doi.org/10.1016/j.dwt.2024.100731.
7	Kiruthika, R., and Sumithra S. "Construction and Selection of a Bayesian Single Sampling Scheme with a Gamma Prior Distribution Using Weighted Poisson Distribution." Revista Electronica de Veterinaria 25, no. 1S (2024).https://doi.org/10.53555/redvet.v25i1S.604.
8	Sivakumar, Dheenadhayalan, Ramasamy Rathinam, Thiagarajan Yamuna Rangaiya, Brindha Thirumalairaj, Umapathi Krishnamoorthy, Md. Irfanul Haque Siddiqui, Natrayan Lakshmaiya, Abhinav Kumar, and Mohd Asif Shah. "Biosurfactants in Biocorrosion and Corrosion Mitigation of Metals: An Overview." Open Chemistry 22, no. 1 (2024): 20240036.https://doi.org/10.1515/chem-2024-0036.
9	Jenifer, J., R. Saratha, and T. Brindha. "Bioactive Seaweed Extracts: Sustainable Solutions for Corrosion Protection." Journal of Bio- and Tribo-Corrosion 10 (2024): 97.https://doi.org/10.1007/s40735-024-00896-4.
10	Prabakaran, R., A. Nirmala, M. Vijaya Kumar, and D. Santhosh Shanthakumar. "Mastering Mathematical Skills Through Classic Game Pallanguzhli." TNSRO India Journal 15, no. 85 (August 2024).www.tnsroindia.org.in ISSN: 0976–0997.
11	John, Sangeeth, Ezhilarasi Santhana Krishnan Balamurugan, Janani Ravichandran, Rudrappa Ambedkar, and Shubra Singh. "Hierarchical Sulfide-Based Photocatalytic Fuel Cell for Wastewater Treatment and Power Generation." Materials for Boosting Energy Storage. Volume 1: Advances in Sustainable Energy Technologies, ACS Symposium Series, 2024. eISBN: 9780841296855.
12	Mohanraj, M., A. Basker, R. Rajkumar, S. Shyamsivappana, and R. Ravikumar. "A Review on Therapeutic Application of Copper Complexes." International Journal of Creative Research Thoughts 12, no. 5 (2024): 212–221.http://ijcrt.org/viewfull.php?&p_id=IJCRT2405560.
13	Mohanraj, M., B. Kajamaideen, R. Rajkumar, S. Shyamsivappana, and R. Ravikumar. "A Review on Therapeutic Application of Palladium Complexes." International Journal of Creative Research Thoughts 12, no. 5 (2024): 624–634. http://ijcrt.org/viewfull.php?&p_id=IJCRT2405494.

2023

S.No.	Publications
1	Bir Abhimanyu Kumar, Kirti Sadhurao Niralwad, R. Roghini, V. Geethalakshmi. “Sustainable Solutions: Biotechnology’s Role in Environmental Conservation.” European Chemical Bulletin, ISSN 2063-5346, (2023). DOI: 10.48047/ecb/2023.12.si12.021.
2	R. Janani, Shubra Singh. “A Review on Potential Sulfide-Based Ternary Chalcogenides for Emerging Photo-Assisted Water Purification Applications.” Environmental Science and Pollution Research, 30, 69751–69773, (2023). DOI: 10.1007/s11356-023-27113-y.
3	M. Ramesh, R. Janani, C. Deepa, L. Rajeshkumar. “Nanotechnology-Enabled Biosensors: A Review of Fundamentals, Design Principles, Materials, and Applications.” Biosensors, 13, 40, (2023). DOI: 10.3390/bios13010040.
4	V. Balasubramaniana, R. Jeyachitrab, T.S. Senthilc, S. Kalpana. “Enhanced Photocatalytic Degradation of Cationic Dye Using Cu-Doped ZnSe.” Optical Materials, 135, 113295, (2023). DOI: 10.1016/j.optmat.2022.113295.
5	Kalpana Devarajan, Shoji M. Samuel, Sunil Kumar, TVSS Swathi, Rajeev Kumar Shakya. “The Role of Artificial Intelligence and Machine Learning in Supply Chain Optimization: A Systematic Review.” Journal of Harbin Engineering University, 44(7), July 2023. https://harbinengineeringjournal.com/index.php/journal/article/view/669.

Department of MCA

2024

S.No.	Publications
1	R. Punithavel, T. Ramesh. “Artificial Intelligence Based Hybrid Predictive Analysis of Diabetes Mellitus.” International Journal of All Research Education and Scientific Methods (IJARESM), January 2024. ISSN: 2455-6211. DOI: 10.0716/IJARESM.2024432908.
2	Ritu Verma, Kishwor Bhandari, Sanjay Prasad Sah, Varagantham Anitha, Yogita Deepak Mane, Punithavel R., Sudipta Banerjee. “AI in Healthcare: Predicting Patient Outcomes Using Machine Learning Techniques.” African Journal of Biological Sciences (AFJBS), July 2024. ISSN: 1847-1861. DOI: 10.48047/AFJBS.6.Si4.2024.1847-1861.

2023

S.No.	Publications
1	Arvind Kumar, Tushar Vyas, Saleem Ahmed, Nitin Girdharwal, E. Vijayakumar, Arivanantham. “Security and Privacy Enabled Framework for Online Social Networks using Blockchain.” Proceedings of IEEE Xplore, July 2023. DOI: 10.1109/ICESC57686.2023.10193119.
2	Chandra Mouli Venkata Srinivas Akana, Arvind Kumar, Mohit Tiwari, Aslanov Zabit Yunus, Dr. E. Vijayakumar. “An Optimized DDoS Attack Detection using Deep Convolutional Generative Adversarial Networks.” August 2023. DOI: 10.1109/ICIRCA57980.2023.10220745.

Department of MBA

2025

S.No.	Publications
1	Krishnamoorthy, K. "Sustainable Investing: ESG Effectiveness and Market Value in OECD Regions." Cogent Economics & Finance 13, no. 1 (January 2025). https://doi.org/10.1080/23322039.2024.2445147.

2024

S.No.	Publications
1	Revathi, P., K. Senthilkumar, and K. S. Ashok Kumar. "AI Assistance in Circular Business Models for Sustainable Development in India." IEEE – International Conference on Science, Technology, Engineering and Management (ICSTEM-24), June 2024. https://ieeexplore.ieee.org/document/10560744.
2	Sivgnanabharathi, S. "Ecommerce and Public Health: Managing the Digital Transformation of Healthcare Services." South Eastern European Journal of Public Health 25, no. S1 (September 2024). https://doi.org/10.70135/seejph.vi.1652.
3	Senthilkumar, K. "The Role of Marketing in Venture Capital Investment Decisions and Portfolio Diversification in Nigeria Startup Ecosystem." South Eastern European Journal of Public Health 25, no. S2 (December 2024).https://www.seejph.com/index.php/seejph/issue/view/49.
4	Krishnamoorthy, K. "Boosting Corporate Value through ESG Excellence in the Oil and Gas Sector." International Journal of Energy Economics and Policy 14, no. 5 (July 2024).https://doi.org/10.32479/ijeep.16714.
5	Sivagnana Bharathi, S., K. Senthilkumar, and T. Thirunavukkarasu. "Data-Driven Strategies on Growth Through AI and Machine Learning." In Advancing Intelligent Networks Through Distributed Optimization, IGI Global, September 2024.https://doi.org/10.4018/979-8-3693-3739-4.ch007.
6	Sivagnana Bharathi, S. "Candidate Performance Prediction—A Detailed Analysis Using Predictive Analytics Workbench." In Anticipating Future Business Trends: Navigating Artificial Intelligence Innovations, Studies in Systems, Decision and Control, September 2024.https://doi.org/10.1007/978-3-031-63402-4_36.
7	Ashok Kumar, K. S. "Predictive Analytics in Retail: Revealing the Strategic Impact of Advertising Channels on Sales Performance Through Python and Linear Regression Model." September 2024.https://doi.org/10.1007/978-3-031-63402-4_36.

2023

S.No.	Publications
1	Mr. S. Sivgnana Bharathi, Dr. K. Prabhakaran, Dr. T. Thirunavukkarasu. “Prioritization of Technology Initiatives to Achieve Digital Transformation Maturity.” European Chemical Bulletin, July 2023. ISSN: 2063-5346, Vol. 8.
2	Dr. T. Thirunavukkarasu. “Green Banking Practices and Strategies: A Step Towards Sustainable FinTech.” European Chemical Bulletin, July 2023. ISSN: 2063-5346, Vol. 4.
3	Dr. T. Thirunavukkarasu. “A Pragmatic Study of Organizational Behaviour in Aerospace Companies.” The Scientific Temper, September 2023. E-ISSN: 2231-6396, Vol. 14, pp. 993-996. DOI: 10.58414/SCIENTIFICTEMPER.2023.14.3.66.
4	Dr. K. Senthilkumar. “Consumer's Awareness and Purchase Decision Precedence towards Solar Energy Products in Kano City of Nigeria.” Journal of Research Administration, November 2023. ISSN: 2573-7104, Vol: 5, pp. 824-836.
5	Krishnamoorthy K. “Variables that Sway the Capital Structure! Evidence from the US Automotive Industry.” Cogent Social Science. DOI: 10.1080/23311886.2023.2293309.
6	Mrs. P. Revathi, Mrs. S. Sindhu. “Pragmatic Evidence of Interrelation Amongst Sectoral Contributions to Macroeconomic Indicator and Selection of Stocks for Constructing an Ideal Portfolio.” Humanities and Social Science Studies, July – December 2023. ISSN: 2319-829X, Vol. 12, Issue 2, No. 14.
7	Dr. T. Thirunavukkarasu, Dr. K. Krishnamoorthy. “The Impact of Social Media on Social Relationships and Well-Being: A Longitudinal Study.” Journal of the Asiatic Society of Mumbai, December 2023. ISSN: 0972-0766, Vol. XCVI, No. 35.
8	Dr. K. Senthilkumar. “Gender Disparities in the Workplace: Examining the Factors Influencing the Gender Pay Gap.” Journal of the Asiatic Society of Mumbai, December 2023. ISSN: 0972-0766, Vol. XCVI, No. 35.
9	Dr. S. Sivgnana Bharathi, Mr. K.S. Ashok Kumar. “Community Resilience in the Face of Natural Disasters: A Comparative Analysis of Preparedness and Recovery Strategies.” Journal of the Asiatic Society of Mumbai, December 2023. ISSN: 0972-0766, Vol. XCVI, No. 35.
10	Dr. S. Sivgnana Bharathi. “Digital Transformation in Management: Exploring the Intersection of Computer Science and Organizational Change.” Journal of Advanced Zoology, December 2023. ISSN: 0253-7214, Vol. 44, No. 2.
11	S. Sivgnana Bharathi, Dr. K. Senthilkumar, K. S. Ashok Kumar, K. Krishnamoorthy. “Data-Driven Marketing Strategies in the Healthcare Industry: Insights from AI and Machine Learning.” International Conference on Evolutionary Artificial Intelligence (ICEAI 2023), September 2023. ISBN: 978-81-932480-7-2, pp. 82-95.
12	S. Sivgnana Bharathi, Dr. K. Prabhakaran, Dr. T. Thirunavukkarasu. “AI in Financial Markets: Predictive Models and Risk Management Strategies.” Evolutionary Artificial Intelligence (ICEAI 2023), September 2023. ISBN: 978-81-932480-7-2, pp. 96-105.

Do you have a project in your
mind? Keep connect us.

Contact Us

Subscribe

Follow Us

Publications

Department of Aeronautical Engineering

Department of Agricultural Engineering

Department of AI&DS

Department of Biotechnology

Department of Biomedical Engineering

Department of Computer Science & Business System

Department of Computer Science and Engineering

Department of Electronics and Communication Engineering

Department of Electrical and Electronics Engineering

Department of Mechanical Engineering

Department of Science and Humanities

Department of MCA

Department of MBA

Do you have a project in your mind? Keep connect us.

Contact Us

Subscribe

Follow Us

Publications

Department of Aeronautical Engineering

Department of Agricultural Engineering

Department of AI&DS

Department of Biotechnology

Department of Biomedical Engineering

Department of Computer Science & Business System

Department of Computer Science and Engineering

Department of Electronics and Communication Engineering

Department of Electrical and Electronics Engineering

Department of Mechanical Engineering

Department of Science and Humanities

Department of MCA

Department of MBA

Do you have a project in your
mind? Keep connect us.